Philips CD 155 Owner's Manual page 45

I cannot change the settings of my
voice mail
• Operator voice mail is managed by
your operator and not the phone itself.
Please contact your operator should
you want to change the settings.
Product behaviour
Keypad does not work!
• Unlock your keypad: Long press
idle mode.
The handset warms up when
making a long call!
• This is a normal behavior. The handset
consumes energy while calling.
The handset cannot be registered to
the base station!
• Maximum number of handsets (4) has
been reached. To register a new
handset, unregister an existing
handset.
• Remove and replace the handset
batteries.
• Try again by disconnecting and
connecting the base station power
supply and follow the procedure to
register a handset (see "Registration"
on chapter 9.2).
Caller number is not displayed!
• Service is not activated: Check your
subscription with your network
operator.
My handset keeps going into idle
mode!
• If there are no key presses for 15
seconds, the handset will automatically
return to idle mode. It will also return to
Frequently asked questions
idle mode automatically when you place
the handset back on the base station.
Phonebook entry cannot be stored
and
MEMORY FULL
• Delete an entry to free memory
before saving your contact again.
The Master PIN code is wrong!
• The default master PIN is 0000.
*
in
• Reset the handset to revert to the default
master PIN code if it has been changed
before (see "Reset unit" on chapter 9.4).
The answering machine does not
record messages!
• Memory is full: Delete your old
messages.
• The
activated. Deactivate
and activate
"Set the answer mode" on chapter 10.5).
Remote control access does not
work!
• Activate Remote Control Access (see
"Remote control access" on chapter
10.6.2).
The phone hangs up during remote
access!
• You have taken more than 4 seconds
to enter the Master PIN code. Enter
the code again within 4 seconds.
Answering machine stops before
the recording is finished!
• Memory is full: Delete your old messages.
is displayed!
mode has been
ANSWER ONLY
ANSWER ONLY
ANSWER & REC
mode (see
43