Electrolux EUFG29800W Instruction Book page 18

It is too cold inside the freezer.
Too much frost and ice are
produced.
The compressor operates
continuously.
No ice
The ice dispenser lamp flashes Leakage in the connection box. Drain the
The ice dispenser lamp flashes
and no ice comes out.
The cabinet does not operate
at all. Cooling or interior light
does not operate. No indicator
lamps light.
Set a warmer temperature.
Fast Freeze could have been switched on.
The temperature display shows the highest
temperature inside the cabinet. Thus a
difference between the temperature indicated
on the display and the (average) temperature
measured in another way is normal.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
Set a warmer temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
The temperature where the cabinet is placed
is above normal room temperature.
The ice machine is not switched on. Start the
ice machine. See the section "Switching the
ice machine on and off".
No water supply. Carry out the necessary
measures on the water supply.
water from the box and tighten the hose nut.
Storage temperature too high. Lower the
temperature in the refrigerator.
No water supply. Carry out the necessary
measures on the water supply.
Re-set the system by pressing the button (G).
The cabinet is not switched on.
Power does not reach the cabinet. (Try
connecting another electrical device to the
power outlet.)
The fuse has blown.
The power plug is not properly connected.
18