HUANUO HNSSD6 Installation Instruction

Download this manual

Installation Instruction

V1.0

HNSSD6

Thank you for choosing our product! We strive to provide the best quality

and services for our customers. Would you kindly share your experience

on Amazon if you are satisﬁed? Should you have any issues, please don't

hesitate to contact us.

Telephone：800-556-0533 Mon-Fri 10am - 6pm (PST) (USA) (CAN)

Email：support@huanuoav.com (US/CA/DE/UK/FR/IT/ES/JP/AU)

Need help?

Do you have a question about the HNSSD6 and is the answer not in the manual?

Page 1 Installation Instruction V1.0 HNSSD6 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisﬁed? Should you have any issues, please don't hesitate to contact us.
Page 2: Features And Specifications
Features & Speciﬁcations ≤28.6lbs (≤13kg) ≤5lbs (≤2kg) A+B≤28.6 lbs (13kgs) CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY, OR SERIOUS INJURY AND/OR PROPERTY DAMAGE MAY OCCUR! Components Tools Required Not Included WARNING PINCH POINT DO NOT place hands on or near support bars. Pinch points are created during lifting and lowering the worksurface.
Page 3 Step 1 When carrying the lift table, be sure to hold the bottom with both hands. Do not subject the table to a separate force. This can cause the tabletop to be out of step with the bottom structure. Warning: Impact Hazard! Moving parts can Crush and Cut.
Page 4 Step 3 Step 4 Step 5 Squeeze the side handle Adjust height 490mm 125mm...
Page 5 Step 6 Step 7 Raise worksurface slowly. Raising Keep the whole monitor and laptop work surface too fast may create an base on the work surface. Allowing unstable situation resulting in any part of base or stand to hang oﬀ property damage and/or personal the edge may result in property injury.