Cd Upsampling; Night Mode - Turning On/Off - Philips DVP3156/93 User Manual

CD Upsampling

This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality.
A
In 'Audio Setup Page', press
select { CD Upsampling }, then press
.
{ Off }
Select this to disable CD Upsampling.
{ 88.2 kHz (x2) }
Select this to convert the sampling rate of
the CDs twice higher than the original.
{ 176.4 kHz (x4) }
Select this to convert the sampling rate of
the CDs four times higher than the
original.
B
Use to select a setting and press
OK to confi rm.
Tip:
– CD Upsampling feature is only applicable
to stereo output setting when playing CD
disc.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
01-49_dvp3156_93_eng2.indd 37 01-49_dvp3156_93_eng2.indd 37
DVD Menu Options

Night Mode - turning on/off

This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A
to In 'Audio Setup Page', press
select { Night Mode }, then press
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
B
Use to select a setting and press
OK to confi rm.
(continued)
to
.
37
2007-03-30 3:01:23 PM 2007-03-30 3:01:23 PM