Storing Tv Broadcasts In Your Vcr - Panasonic NV-SJ400A Operating Instructions Manual

Storing TV Broadcasts in Your VCR

The VCR is fitted with its own tuner (just like a normal TV)
and can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels (Australia only)
The local TV broadcast channels 2, 7, 9, 10 and 28 are
factory-preset in this VCR.
That is, if you can receive television broadcasts on VHF
channels 2, 7, 9, 10 and UHF channel 28, these are already
tuned on the programme positions with the matching
numbers. However, it is possible to cancel these settings and
tune the local TV broadcast channels to any desired
programme position.
Auto Tuning Using the On Screen Display For
New Zealand
When you use this VCR in New Zealand, need to operate as
follows:
Preparations
≥ Confirm that the VCR is on.
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
Operations
1 Press the MENU button
display the Main menu on
the TV screen.
2 Press the Cursor buttons (34
to select "TUNER PRESET" then
press the ENTER button
3 Press the Cursor buttons (34
to select "COUNTRY" then press
the Cursor buttons (2 1
2 1 2 1 2 1 2 1)
select "NEW ZEALAND".
4 Press the Cursor buttons (34
to select "AUTO TUNE" then press
the Cursor buttons (2 1
2 1) 2 1 2 1 2 1
start the Auto Tuning.
≥ When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
MENU
to
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT : ,ENTER
END :MENU
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
34 34
34 34)
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
. SELECT : ,ENTER
END :MENU
TUNER PRESET
CH 1
CLEAR (OFF)
COUNTRY (AUSTRALIA)
AUTO TUNE
SEARCH
34 34 FINE
34 34)
END :MENU
SELECT:
to
TUNER PRESET
CH 1
CLEAR (OFF)
COUNTRY (NEW ZEALAND)
AUTO TUNE
SEARCH
FINE
SELECT: END :MENU
34 34 34) 34
TUNER PRESET
CH 1
CLEAR (OFF)
COUNTRY (NEW ZEALAND)
to
AUTO TUNE
SEARCH
FINE
END :MENU
SELECT:
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1 SEARCH µ
END: MENU
The number displayed here is
the number of channels still
to be auto tuned.
Auto Tuning Using the On Screen Display For
Australia
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should
be performed according to the following method if necessary.
Preparations
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR and select any programme position
except A1 or A2.
Operations
1 Press the MENU button
display the Main menu on the
TV screen.
2 Press the Cursor buttons (34
to select "TUNER PRESET" then
press the ENTER button
3 Press the Cursor buttons (34
to select "AUTO TUNE" then press
the Cursor buttons (2 1
start the Auto Tuning.
≥ When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
(3)
Channels that can be Received
(3)
AUSTRALIA
NEW ZEALAND
(3)
Notes:
≥ Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
≥ Auto Tuning takes five or more minutes to complete its
search.
≥ If the VCR is not correctly tuned by Auto Tuning, follow the
100
procedure on the next page.
MENU
to
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END
34) 34 34
34 MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
.
G-CODE CH SET
SYSTEM
OPTION
SELECT
END
34 34) 34 34
TUNER PRESET
CH 1
CLEAR
COUNTRY
to
2 1 2 1 2 1 2 1) AUTO TUNE
SEARCH
FINE
SELECT:
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1 SEARCH
The number displayed here is
the number of channels still
to be auto tuned.
VHF CATV UHF
0–12 45– 470MHz 28 –69
1–11 45– 470MHz 21 –69
: ,ENTER
:MENU
: ,ENTER
:MENU
(OFF)
(AUSTRALIA)
(3)
END :MENU
µ 100
END: MENU
9