Recording Function - Panasonic NV-SJ400A Operating Instructions Manual

For Reduced the VCR's Power
Consumption When the VCR Is Switched
Off
Follow steps 1 to 2 of TAPE SELECT.
3 Press the Cursor buttons (34
to select "POWER SAVE" then
select "ON" or "OFF" by pressing
the Cursor buttons (2 1
ON: This setting makes the
display disappear when
the VCR is off.
It will not operate in the
Timer standby mode.
After recording all
programmed data, the
VCR will go into Power
save mode.
OFF: This setting does not conserve power when the
VCR is off.
4 Press the MENU button
Display.
To Set to the Conditions for Direct

Recording Function

Follow steps 1 to 2 of TAPE SELECT.
3 Press the Cursor buttons (34
to select "DIRECT REC" then
select "ON" or "OFF" by pressing
the Cursor buttons (2 1
OFF: Initially set at this
position.
ON: This setting enables
Direct Recording.
AV Input (A1) becomes
exclusive channel for
Direct Recording.
(See page 20.)
4 Press the MENU button
Display.
16
On Screen Display
34 34 34) 34
OPTION
TAPE SELECT
NTSC INPUT SELECT
NTSC PB SELECT
NTSC CONVERTER
POWER SAVE
DIRECT REC
.
2 1 2 1 2 1 2 1)
SELECT:
OPTION
TAPE SELECT
NTSC INPUT SELECT
NTSC PB SELECT
NTSC CONVERTER
POWER SAVE
DIRECT REC
SELECT:
twice to exit the On Screen
34 34
34) 34
OPTION
TAPE SELECT
NTSC INPUT SELECT
NTSC PB SELECT
NTSC CONVERTER
POWER SAVE
DIRECT REC
.
2 1 2 1
2 1 2 1)
SELECT:
OPTION
TAPE SELECT
NTSC INPUT SELECT
NTSC PB SELECT
NTSC CONVERTER
POWER SAVE
DIRECT REC
SELECT:
twice to exit the On Screen
(E180)
(AUTO)
(onPALTV)
(OFF)
(OFF)
(OFF)
END :MENU
(E180)
(AUTO)
(onPALTV)
(OFF)
(ON)
(OFF)
END :MENU
(E180)
(AUTO)
(onPALTV)
(OFF)
(OFF)
(OFF)
END :MENU
(E180)
(AUTO)
(onPALTV)
(OFF)
(OFF)
(ON)
END :MENU