Panasonic NV-SJ400A Operating Instructions Manual page 10

Preparations
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR and select any programme position
except A1 or A2.
≥ Set the VCR/TV switch
Manual Tuning Procedure
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons (34
PRESET" then press the ENTER button
3 Press the Cursor buttons (34
select the channel number you want to tune by pressing
the Cursor buttons (2 1
4 Confirm that "CLEAR" is set to "OFF".
5 Press the Cursor buttons (34
then press the Cursor buttons (2 1
Manual Tuning.
On Screen Display
CH 2 SEARCH µ
END: MENU
6 If the desired TV station has not been tuned, press the
Cursor buttons (2 1
2 1 2 1 2 1) 2 1
≥ Press the MENU button
each programme position you want to tune to a station.
7 Press the MENU button
Screen Display.
Direct Tuning Procedure
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons (34
PRESET" then press the ENTER button
3 Press the Cursor buttons (34
select the channel number you want to tune by pressing
the Cursor buttons (2 1
4 Confirm that "CLEAR" is set to "OFF".
5 Press the Cursor buttons (34
to select "SEARCH".
6 Press the Numeric buttons
enter the number of the desired
programme position.
For the 5A and 9A channels, input the following numbers:
90 for CH-5A, 91 for CH-9A. (Example for Australia.)
≥ For other channels that require tuning, repeat
steps 3–6.
7 Press the MENU button
Display.
10
is set to "VCR".
to display the Main menu on
to select "TUNER
34 34
34 34)
.
to select "CH" then
34 34) 34 34
.
2 1 2 1
2 1 2 1)
to select "SEARCH"
34 34
34) 34
to start the
2 1 2 1 2 1 2 1)
CH 2 SEARCH 74
∂/µ: END: MENU
again.
and repeat steps 3–5 for
three times to exit the On
to display the Main menu on
to select "TUNER
34) 34 34 34
.
to select "CH" then
34 34
34) 34
.
2 1 2 1 2 1 2 1)
34 34 34) 34
TUNER PRESET
CH 1
CLEAR
COUNTRY
AUTO TUNE
SEARCH
to
FINE
SELECT:
twice to exit the On Screen
Fine Tuning Procedure
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons (34
PRESET" then press the ENTER button
3 Press the Cursor buttons (34
select the channel number you want to tune by pressing
the Cursor buttons (2 1
4 Press the Cursor buttons (34
press the Cursor buttons (2 1
Tuning.
≥ Press the ENTER button
former state.
5 Press the MENU button
Blanking of Unused Programme Positions
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons (34
PRESET" then press the ENTER button
3 Press the Cursor buttons (34
select the channel number you want to tune by pressing
the Cursor buttons (2 1
4 Press the Cursor buttons (34
then press the Cursor buttons (2 1
≥ Repeat steps 3– 4 for other unused programme
positions to skip during the selection of programme
positions.
≥ To cancel the blanking of a programme position select
that programme position then select "CLEAR" is "OFF".
5 Press the MENU button
Display.
(OFF)
(AUSTRALIA)
(90)
END :MENU
to display the Main menu on
to select "TUNER
34 34 34 34)
.
to select "CH" then
34 34 34 34)
.
2 1 2 1
2 1 2 1)
to select "FINE" then
34 34 34 34)
to start the Fine
2 1 2 1
2 1) 2 1
to return the tuning to its
CH2 AFC: ENTER
FINE µ ∂/µ: END: MENU
to exit the On Screen Display.
to display the Main menu on
to select "TUNER
34 34 34) 34
.
to select "CH" then
34 34 34) 34
.
2 1 2 1 2 1)
2 1
to select "CLEAR"
34) 34 34 34
to select "ON".
2 1 2 1
2 1 2 1)
twice to exit the On Screen