Sleep Timer - Dcybel LONDON Instruction Manual

Alarm 1 buzzer indicator
Alarm 1 radio indicator
Setting Alarm 2
1. In clock time state, press and hold
• The clock time will flash on the display.
2. While the clock time is flashing, repeatedly press or press & hold
and respectively to set the alarm time.
3. Press / to confirm.
4. Repeatedly press
buzzer mode.
• The corresponding alarm mode indicator will appear on the
display.
To Stop and Cancel Alarm
When alarm 1 or 2 is sounding, the corresponding symbol will flash
on the display. Press
again at the same time on the following day.
If you want to cancel the alarm 1 and/or 2, repeatedly press
/ until all the alarm mode indicators disappear from the display.
Snooze Function
When the alarm sounds, press SNOOZE/SLEEP/DIMMER. The
alarm will be turned off and come on again after about 9 minutes.
SLEEP TIMER
1. When the radio is playing, press SNOOZE/SLEEP/DIMMER.
• The display will show "90".
2. Repeatedly press SNOOZE/SLEEP/DIMMER to set the desired
sleep time from 10 to 90 minutes in increments of 10 minutes.
3. The radio will be turned off after the set sleep time has elapsed.
To check remaining sleep time, press SNOOZE/SLEEP/DIMMER.
To turn off the radio before the sleep time has elapsed, press
repeatedly press SNOOZE/SLEEP/DIMMER until the display shows
"OFF".
/
/ to set the alarm to wake to the radio or
Alarm 2 buzzer indicator
Alarm 2 radio indicator
to stop the alarm. The alarm will sound
EN-6
for about 2 seconds.
/ or
or