Recording Motion Images - Panasonic DMC-LC40PP Operating Instructions Manual

Recording Motion Images

• The remaining time displayed on the LCD monitor is an approximation.
• You cannot record motion images without audio.
• If using the MultiMediaCard, after recording motion images, the screen may appear grey,
but this is not a malfunction.
• After recording starts, the auto focus and zoom are locked (with the first frame).
• Recording could suddenly stop when recording motion images.
With this camera you can also record motion
images. (If using the supplied 16MB SD
Memory Card, it is possible to record for
about 75 seconds)
[Preparations]
• Insert the card. (P16)
• Set the power switch to [ON]. (P18)
• Set the operational mode dial to single mode
[ ]. (P25)
1
Set the REC mode dial to motion image
mode [
2
Center the subject in the focus area
on the LCD monitor and press the
shutter button halfway.
• When the focus is adjusted, the focus
indication [¥] appears. (1 Focus indication)
3
By pressing the shutter button fully,
the recording starts.
• The audio REC starts simultaneously.
4
By pressing the shutter button fully
again, recording stops.
• If during the recording the memory of the
135S
card becomes full, the recording is stopped
automatically.
ª In motion image record mode, the settings
listed below are not available
• Picture size (P38)
• Built-in flash (P34)
• White balance (P52)
• ISO sensitivity (P54)
].
31