Advertisement
A&L Technology
Connections and Controls
Please refer to the following scheme and instructions:
8
AC INPUT
MAINS
85-264Vac
50HZ
11
POWER ON
10
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
1. INPUT: Balanced signal input (Combi) for connection of an external audio source (e.g., mixer).
2. LINK: Balanced signal output (XLR 3p) for connection of another LOUD active system.
3. USB: USB 2.0 port (type B) to connect the cable to establish communication between DSP and computer.
4. PRESET LED:
Preset LED indicator, from A to E, there are 5 storable and selectable presets.
5. PREST:
Preset push button to select one of the 5 storable presets on the DSP, from A to E.
6. VOLUME: Master LEVEL system adjustment.
7. OUTPUT: Speaker output (NL4) for connection of the first LOUD205 array element. Min. load: 4Ohm. The other
3 array elements are signal linked from each other using the cables supplied.
8.
MAINS IN: NEUTRIK powerCON socket, 85~264Vac, 50~60Hz Power-in (blue).
9. MAINS OUT: NEUTRIK powerCON socket, 85~264Vac, 50~60Hz Power-out (white).
10. POWER ON: Illuminated on/off switch. Before switching the system on/off, always adjust the volume to zero.
11. FUSE: Fuse holder. Replace the fuse only with a fuse of the same type and rating. If the fuse blows repeatedly,
please contact an authorised service company.
A&L Technology Roterijstraat 130 B-8790 Waregem Belgium. ,Tel: +32 04720190 758, info@alprogear.be
9
7
AC OUTPUT
SPEAKER OUT
OUTPUT
MID
HI
PIN
+1 -1
+2 -2
SIGNAL
LOAD
4 Ohm min.
FUSE F 5A
To prevent electrical shock do not remove
CAUTION
the cover. No user serviceable parts inside.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
Refer service to qualifi ed personnel only.
1
2
4
BALANCED
UNBALANCED
PIN
1
2
3
PIN
1
2
3
SIGNAL
SIGNAL
A
B
C
D
E
USB
INPUT
THROUGH
Active line array system
Class D Amplifier
LOW
Integrated DSP
MID/HI 720W rms
LOUD
Active Line Array system
5
PRESET
6
-80dB
0dB
3
LOUD
720W rms
Advertisement
