Table of Contents
Advertisement
Quick Links
RC01 Remote Controller
Manual
Thank you for purchasing this product. To ensure proper use and trouble-free operation, please
read this manual carefully and store it in a safe place for future reference.
Introduction
The RC01 is a dedicated remote controller for the X-Sense wireless interlinked alarms. It easily
controls the paired smoke alarms, sparing users the effort of straining and reaching up to the
ceiling for alarm testing and silencing.
Note: The X-Sense wireless interlinked alarms are not included in the package. Please purchase
them individually.
Important Safety Instructions and Guidelines
Do not hold the test button for an extended period of time or press repeatedly.
Do not modify this device under any circumstances.
Only use the batteries specified and be sure to match the polarity marking.
Package Contents
1 × Remote Controller (Battery Included)
1 × Adhesive Tape
1 × Key
2 × Screw
2 × Anchor Plug
1 × Manual
Advertisement
Table of Contents
Related Manuals for x-sense RC01
Summary of Contents for x-sense RC01
- Page 1 Introduction The RC01 is a dedicated remote controller for the X-Sense wireless interlinked alarms. It easily controls the paired smoke alarms, sparing users the effort of straining and reaching up to the ceiling for alarm testing and silencing.
- Page 2 Peel off the insulating film on the button cell.Ensure the correct polarity of the batteryand close the cover. Pair Remote Control with the X-Sense Wireless Interlinked Alarm 1. Choose one alarm out of the interconnected alarms. Press its test/silence button 4 times. This alarm will beep once and the red LED will keep flashing slowly, indicating that it enter pairing mode.
- Page 3 turn off in about 3 seconds, indicating that the controller has exited pairing. The alarm in the pairing mode will beep once and automatically enter standby mode. Test the Wireless Connection Between Alarms 4. Hold the test button while within wireless range. The LED indicatoron the remote controller will flash.
- Page 4 The indicator on the remote The insulating film on the Peel off the insulating film. controller does not light up battery has not been peeled when I press the button. off. The battery is not properly Take out the battery and install it installed.
- Page 5 This product must not be disposed of as household waste. Dispose of the device at an authorized collection point for the recycling of electrical appliances. X-Sense Innovations Co., Ltd. Address: B4-503-D, Tower B, Kexing Science Park, No. 15 KeyuanRoad, Technology Park Community, Yuehai Avenue, Nanshan District,Shenzhen, 518057, CHINA Email: support@x-sense.com...
Need help?
Do you have a question about the RC01 and is the answer not in the manual?
Questions and answers