Earth Compass - Casio G'zOne Ravine User Manual

NOTES
• The Location setting is set to E911 Only by default, and detection
of the phone's current location using GPS is disabled. To enable
location detection with G'zGEAR
For instructions on how to set Location to On, see page 155.
• From idle mode, you can directly access the G'zGEAR
pressing and holding the G'zGEAR Key
®
• G'zGEAR
®
G'zGEAR

Earth Compass

In Compass mode, the direction measured with the built-in electronic
compass is displayed.
In World Nature mode, the compass and natural objects in the
direction the handset is facing are displayed on the screen.
In Customizable Compass mode, the compass and user created points
in the direction the handset is facing are displayed on the screen.
1.
From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Tools.
2.
Select G'zGEAR, then press the Center Select Key [OK],
Earth Compass.
3.
The following keys are available in the Earth Compass:
• Directional Key
• Directional Key
direction the handset is facing to measure the distance to that
object. (Only in World Nature mode)
• Directional Key
the direction the handset is facing to measure the distance to that
point. The selected point can be edited or erased by pressing
the Center Select Key [EDIT]. (Only in Customizable Compass
mode)
118
does not end automatically. When you do not use
, be sure to press the End/Power Key to end G'zGEAR
left or right: Switches the mode.
up or down: Selects the natural object in the
up or down: Selects the user created point in
®
, Location must be set to On.
.
®
by
®
.