First-Time Installation; Switching On For The First Time And Start - Nokia Mediamaster 120T Introduction Manual

First-time installation

Switching on for the first time and start

• Plug in your Mediamaster and the "First-time installation" menu
is shown.
• Press ok to continue with the channel search.
The menu will be shown as long as the Mediamaster is searching
for TV and radio channels.
All channels found will be listed on the screen.
NOTE: the search procedure may take a few minutes. You can cancel
the search at any time by pressing ok.
When the search procedure has ended, a message will tell you how
many TV and radio channels have been found.
• Press ok to start watching digital TV channels.
If no TV channel is automatically shown after you have finished the
installation procedure;
• Step up or down with the
channel.
GB 10
buttons to select another