Put the shelf between the guide bars of
the shelf support.
Do not push the baking tray
all the way to the back wall
of the cavity. This prevents
the heat from circulating
around the tray. The food
may be burnt, especially in
the rear part of the tray.
12. OVEN - HINTS AND TIPS
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
12.1 General information
The appliance has four shelf positions.
Count the shelf positions from the bottom
of the appliance floor.
The appliance has a special system
which circulates the air and constantly
recycles the steam. With this system you
can cook in a steamy environment and
keep the food soft inside and crusty
Push the tray or deep pan between the
guide bars of the shelf support. Make
sure it does not touch the back wall of
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
outside. It decreases the cooking time
and energy consumption to a minimum.
Moisture can condense in the appliance
or on the door glass panels. This is
normal. Always stand back from the
appliance when you open the appliance
door while cooking. To decrease the
condensation, operate the appliance for
10 minutes before cooking.
Clean the moisture after each use of the
Do not put the objects directly on the
appliance floor and do not put aluminium
foil on the components when you cook.
This can change the baking results and
cause damage to the enamel.
For the first baking, use the lower