NEC M230X User Manual page 88

Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
NOTE: The [HORIZONTAL] and [VERTICAL] items are not available for VIDEO, S-VIDEO, HDMI, VIEWER, NETWORK, and USB
DISPLAY.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency,
its adjustments will be called up and applied.
To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL
DATA] and reset the adjustments.
Selecting Overscan Percentage [OVERSCAN]
Select overscan percentage (0%, 5% and 10%) for signal.
NOTE:
• The [0[%]] cannot be selected when VIDEO and S-VIDEO signals are used.
• The [OVERSCAN] item is not available:
• when [NATIVE] is selected for [ASPECT RATIO].
• when [VIEWER], [NETWORK], or [USB DISPLAY] is selected for [SOURCE]
Projected image
Overscaned by 10%
78
5. Using On-Screen Menu