Introduction To The Projector; Congratulations On Your Purchase Of The Projector; Features You'll Enjoy - NEC M230X User Manual

 Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This projector is one of the very best projectors available today. The projector enables you to project precise images up
to 300 inches (110 inches on short-throw models) across (measured diagonally) from your PC or Macintosh computer
(desktop or notebook), VCR, DVD player, or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*
* Do not attempt to mount the projector on a ceiling yourself.
1
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk
of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes. Please consult your dealer for more information.

Features you'll enjoy:

• Quick start (3 seconds*
3 seconds* after turning on the power, the projector is ready to display PC or video images.
1
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when
projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
*1 The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message.
• 0.2 W (100-130 V AC)/0.4 W (200-240 V AC) in standby condition with energy saving technology
Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode
that consumes only 0.2 W (100-130 V AC)/0.4 W (200-240 V AC).
• Carbon Meter
This feature will show energy-saving effect in terms of CO
MODE] is set to [AUTO ECO], [ECO1], or [ECO2]*
The amount of CO
2
in the INFO of the on-screen menu.
*2 [ECO2] is available on M300X, M260X, and M260XS only.
• Longer lamp life without cleaning the filters regularly
Using in Eco Mode allows you to prolong the projector's lamp life.
The two-layer, large filters require no regular cleaning. Filter replacement is requred only at the time of the lamp
replacement.
• Short throw distances (M350XS/M300XS/M260XS/M300WS/M260WS)
Short focal lenses provide for a larger image using a shorter throw distance when compared to a typical projector
lens.
• HDMI input port provides digital signal
The HDMI input provides HDCP compatible digital signals. The HDMI input also supports audio signal.
• 10 W built-in speaker for an integrated audio solution (not available on M420XV)
Powerful 10 watt monaural speaker provides volume need for large rooms.
), Quick Power Off (0 seconds), Direct Power Off
1
emission reduction will be displayed in the confirmation message at the time of power-off and
. The remote control can be used wirelessly.
1
emission reduction (kg) when the projector's [ECO
2
.
2
2
1. Introduction