Nautilus T514 Assembly And Owner's Manual page 27

If you are in the Manual Program (Quick Start) or you did not go through the user profile to your
Note:
workout selection, no workout data is saved.
• • •
To discard your workout data, push the STOP key and hold for 3 seconds, or push STOP and ENTER/RESET. The console
goes back to Ready Mode.
Profile Programs
After you make your program selection, you can set the time period in a range of 10:00–99:00. Or you can push the QUICK START key
to use the 24:00 default time.
Challenge #1
You set the maximum speed, and the treadmill adjusts as shown in this profile. You can manually adjust the incline.
Challenge #2
You set the maximum incline, and the treadmill adjusts as shown in this profile. You can manually adjust the speed.
Challenge #3 (model T516 only)
The Incline profile shows in the Program Selection menu. After you set the time, you can set the maximum incline or speed, and
the treadmill adjusts as shown in these profiles.
Incline
Intervals #1
You set the maximum speed, and the treadmill adjusts as shown in this profile.
Speed
27 27 27