Napoleon PTHC38PK Manual,Instructions & Parts List page 8

NOTE: Assembly of this heater requires
basic mechanical skills. Proper assembly
is the responsibility of the installer.
Step 5 ---- Attach Center Reflector and Reflector
to the top of Head Assembly
Load center reflector and reflector to the top
of head assembly by
double pointed bolts (3 pcs)
6mm washers (3 pcs) and nuts (3 pcs)
Step 6 ---- Connect Gas Line to Cylinder
Attach Gas hose to regulator hose with
3/8 Inch Open End Wrench and
Adjustable Wrench.
Attach regulator to cylinder. Tighten securely.
Move cylinder to the plate of base assembly.
Step 5
Step 6
8
ASSEMBLY ASSEMBLY
7
9
13
3
4
15