Motorola BLUETOOTH STEREO HEADPHONES Instruction Manual page 12

Pair the Stereo Headphones and Home Stereo Adapter
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it
is easy to reconnect to the last device used after you have performed the initial pairing.
1. Make sure the stereo headphones are turned off and unplugged. If the headphones are on, press and hold the
Call button for about 3 seconds until the indicator light flashes rapidly and turns off.
2. Place the stereo headphones as close as possible to the home stereo adapter (about 1 - 3 inches is
recommended).
3. On the stereo headphones, press and hold Call button for about 6 seconds until the indicator light turns on and
remains steadily lit.
4. On the home stereo adapter, press and hold the pairing button for about 5 seconds until the indicator light
turns on and remains steadily lit. When pairing is successful, the pairing button on the home stereo adapter
flashes rapidly and the indicator light on the headphones changes from steadily lit to flashing.
Listen and Use
Play some music on your home audio system. You should hear the music on your stereo headphones.
For information on using the music controls on the stereo headphones,
visit www.hellomoto.com/bluetoothsupport.
12