Download Print this page

Get Started - Motorola MOTONAV TN30 User Manual

Motorola car gps receiver user's guide
Hide thumbs

Advertisement

get started

To get started, you need to turn on your MOTONAV TN30 and configure
initial device settings:
Press and hold the Power button to turn on the device until the display
1
becomes active.
After a few moments, a configuration wizard appears to provide step-by-step
setup instructions.
Set your language preference and tap OK.
2
3
Review Warning message and tap OK.
4
Review End User License Agreement (EULA), then tap the I Agree
checkbox and tap OK.
5
Set your time zone settings and tap OK.
Set your preferred measurement units and tap OK.
6
8
get started
If using your Bluetooth phone to make and receive handsfree calls from
7
your MOTONAV TN30, tap Yes button and follow these substeps to
connect to your phone. Otherwise, tap No and skip to step 8.
a
Turn off any Bluetooth devices previously paired with your
MOTONAV TN30.
b
Turn on the Bluetooth feature on your Bluetooth phone.
c
Place phone in Bluetooth search mode.
Select MOTONAV TN30 from search results on your phone.
d
e
Select OK or Yes to pair your MOTONAV TN30 with your phone.
f
If prompted, enter 0000 for passkey. When your MOTONAV
TN30 successfully pairs and connects with your phone, you see a
confirmation message.
9

Advertisement

loading

  Related Manuals for Motorola MOTONAV TN30