NV-U74
NOTES ON CHIP COMPONENT REPLACEMENT
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
•
Keep the temperature of soldering iron around 270 °C during
repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
2
TABLE OF CONTENTS
1.
2.
..................................................................
3.
3-2. Cap ..................................................................................
3-6. MAIN Board ................................................................... 10
4.
............................................................ 11
5.
5-10. Schematic Diagram - MAIN Board (5/10) - ................... 26
6.
7.
Accessories are given in the last of the electrical parts list.
.............................................
.............................. 50
3
5
7
7
8
8
9