Kinput Capacity; Kmaking Corrections During Input - Casio fx-270MS User Manual

Note!
• To return the calculation mode and setup to the initial
defaults shown below, press
Calculation Mode:
Angle Unit:
Exponential Display Format: Norm 1
Fraction Display Format:
Decimal Point Character:
• Mode indicators appear in the upper part of the display.
• Be sure to check the current calculation mode (SD, REG,
COMP) and angle unit setting (Deg, Rad, Gra) before
beginning a calculation.
k Input Capacity
• The memory area used for calculation input can hold 79
"steps." One step is taken up each time you press a
number key or arithmetic operator key (
A p
A or
A D
inputting
• You can input up to 79 steps for a single calculation.
Whenever you input the 73rd step of any calculation,
the cursor changes from "_" to "k" to let you know
memory is running low. If you need to input more than
79 steps, you should divide your calculation into two or
more parts.
• Pressing the
you can use in a subsequent calculation. See "Answer
Memory" for more information about using the
k Making Corrections During Input
e
• Use and
want.
[
• Press
cursor position.
A K
• Press
something while the insert cursor is on the display in-
serts the input at the insert cursor position.
A K
• Pressing
the insert cursor.
key operation does not take up a step, so
, for example, takes up only one step.
g
key recalls the last result obtained, which
r
to move the cursor to the location you
to delete the number or function at the current
to change to an insert cursor
=
, or
A B 2
COMP
Deg
b
a /
c
Dot
returns to the normal cursor from
E-8
=
(Mode)
+ , -
, , ,
g
t
. Inputting
.
\
).
key.