MICROCASSETTE &
GENERAL
PAGE
32 32 32 32 32
BATTERY INSTALLATION
REMOVING/REPLACING
MICROCASSETTE
If it becomes necessary to remove or replace
the microcassette be sure to play messages
first.
1
Gently lift the tape out from the left side.
2
INSTALL
a new microcassette.
3
ON/OFF
Press
4
RE-RECORD
(see page 6).
to turn the machine on.
your outgoing message
BATTERY
INSTALLATION
THIS UNIT IS SHIPPED WITH THE
HANDSET BATTERY PACK
INSTALLED.
If it becomes necessary to replace the battery
pack:
1
Press down on the battery compartment
cover and slide it toward the bottom of the
handset.
2
Install the new battery pack with the red
wire on the right side of the black wire
(see drawing.)
3
Replace the battery cover by sliding it up
from the bottom.
4
Place the handset in the base unit and
charge the battery pack for 12-15 hours.
WARNING: Use only NiCad
Rechargeable Battery Pack
(3.6 volts 250 - 300 mAh.)
Red Wire
Black Wire