Removing Units; Figure 6. Connecting The Antistatic Wrist Strap - Nokia MetroSite Maintenance Manual

Figure 6.
6.2

Removing units

Figure 7 shows how the units are pulled out from the unit slots. Read the detailed
step instructions for each unit before pulling the units out.
If you are replacing BTS units, keep the units protected in their delivery packages
until they are needed. After installation, keep some of the packaging material for
packing the removed units when sending them for service. Recycle any remaining
packaging material.
Caution
Handle the units with care. Do not knock the units or place them with their
connectors facing the ground. Prevent dirt, water, or snow from entering the
connectors.
28 (52) © Nokia Corporation
Nokia Proprietary and Confidential
All manuals and user guides at all-guides.com
Wrist strap
Connecting the antistatic wrist strap.
to ESD stud
Draft
Maintenance
ESD stud
DN9913495
Issue 3-0 en