Maintenance; Specifications - NHT C Series Quick Start Manual

Maintenance

Your NHT speakers will require little if any maintenance under normal use. Try to avoid exposing them to
direct, sustained sunlight, high temperatures or moisture. Cabinets can best be dusted using a clean, soft
chamois cloth. The finish on your speakers is durable but dry rough cloth and/or excessive force can leave fine
scratches over time. Try to avoid using liquid cleaners and household furniture polish, particularly around the
speaker components. To clean the grilles, remove them from the speaker and use a soft brush or a vacuum on
its lowest setting. Do not attempt to clean the speaker components.
Satisfaction
We hope you enjoy the sound of your NHT C-Series speakers as much as we do. Your warranty is printed
on the back of this Setup Guide. Once again, if you have any questions or problems, please call us at our
Consumer Hotline. 1-800-NHT-9993

Specifications

C-4
System type
Tower Speaker
Configuration
4-way acoustic suspension design
Woofer
(2) 6.5" aluminum cone
Lower Midrange
6.5" aluminum cone
Midrange
2" aluminum dome
Tweeter
1" aluminum dome
Frequency Response
45Hz-20kHz (in room)
Sensitivity
84dB (2.83v@1m)
Impedance
8 ohms nominal, 5 ohms min.
Recommended Power
75 - 250 w/ch
Inputs
Nickel plated
5-way binding posts
Dimensions
41" x 7.5" x 11.75" (H x W x D)
Base
14" x 5" (W x D)
Weight Finish Sold
46.6 lbs. Individually
High Gloss
Black
C-3
System type
Bookshelf speaker
Configuration
3-way acoustic suspension design
Woofer
6.5" aluminum cone
Midrange
2" aluminum dome
Tweeter
1" aluminum dome
Frequency Response
48Hz-20kHz (in room)
Sensitivity
85dB (2.83v@1m)
Impedance
6 ohms nominal, 4 ohms min.
Recommended Power
50 - 150 w/ch
Inputs
Nickel plated
5-way binding posts
Dimensions
13.75" x 7.5" x 10.125" (H x W x D)
Weight
16 lbs.
Finish
High Gloss Black
Sold
Individually
Specifications are subject to change without notice.
C-1
System type
Bookshelf speaker
Configuration
2-way acoustic suspension design
Woofer
5.25" polypropylene cone
Tweeter
1" aluminum dome
Frequency Response
70Hz-20kHz (in room)
Sensitivity
84dB (2.83v@1m)
Impedance
6 ohms nominal, 4 ohms min.
Recommended Power
35 - 100 w/ch
Inputs
Nickel plated
5-way binding posts
Dimensions
9.625" x 5.75" x 7.5" (H x W x D)
Weight
8 lbs.
Finish
High Gloss Black, White
Sold
Individually
C-LCR
System type
Left, Center, Right
Configuration
Acoustic suspension design
Woofer
(2) 6.5" aluminum cone
Midrange
2" aluminum dome
Tweeter
1" aluminum dome
Frequency Response
55Hz-20kHz (in room)
Sensitivity
86dB (2.83v@1m)
Impedance
8 ohms nominal, 6 ohms min.
Recommended Power
75 - 200 w/ch
Inputs
Nickel plated
5-way binding posts
Dimensions
7.125" x 21.125" x 9" (H x W x D)
Weight
21.5 lbs.
Finish
High Gloss Black
Sold
Individually