iDataLink maestro RR Install Manual

2009-2012 ford f150 with nav

Hide thumbs Also See for maestro RR:

Install manual (1403 pages)

How to use manual (201 pages)

Manual (106 pages)

page of 45

/ 45
Bookmarks

Quick Links

Download this manual

SELECT VEHICLE

PRINT PAGES NEEDED

HOW TO USE THIS INSTALL GUIDE

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

Pressing the printer icon or "quick printing" this document will print

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁ ed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

all of the guides in this compilation.

Need help?

Do you have a question about the maestro RR and is the answer not in the manual?

Questions and answers

Summary of Contents for iDataLink maestro RR

Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
Page 2 NAV RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE! PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro KFOR01 Dash Kit Radar Installation Guides E L E C T R O N I C S...
Page 3 Ford F150 with NAV 2009-2012 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
Page 4 9. Some trimming may be required in order for the top of the aftermarket radio chassis to clear and sit straight in the dash. (Fig. 1.10) Fig. 1.7 Fig. 1.8 Fig. 1.1 Fig. 1.2 Fig. 1.9 Fig. 1.10 Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 5 C: Aftermarket radio Plug the data cable to the data port of the aftermarket radio. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio (labeled iDatalink. If there is no iDatalink audio input, connect to AUX).
Page 6 FACTORY RADIO HARNESS DATA AUDIO VEHICLE CABLE CABLE STEP 6 STEP 3 STEP 3 OBDII CONNECTOR STEP 5 STEP 5 PINK/RED (NC) MAESTRO RR MODULE FO1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 7 Illumination Orange Orange/White Orange/White Orange Reverse Light Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake Lt Green Yellow/Blue Lt Green Lt Green Lt Green VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 8 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the ﬂ...
Page 9 NAV RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE! PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro KFOR01 Dash Kit Radar Installation Guides E L E C T R O N I C S...
Page 10 Ford Flex with NAV 2010-2012 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
Page 11 (Fig. 1.6) 7. Using (4) 7mm screws, reinstall the radio chassis brackets and set the screen brackets aside to be used later. (Fig. 1.7) Fig. 1.5 Fig. 1.6 Fig. 1.7 Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 12 C: Aftermarket radio Plug the data cable to the data port of the aftermarket radio. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio (labeled iDatalink. If there is no iDatalink audio input, connect to AUX).
Page 13 FACTORY RADIO HARNESS DATA AUDIO VEHICLE CABLE CABLE STEP 6 STEP 3 STEP 3 OBDII CONNECTOR STEP 5 STEP 5 PINK/RED (NC) MAESTRO RR MODULE FO1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 14 Illumination Orange Orange/White Orange/White Orange Reverse Light Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake Lt Green Yellow/Blue Lt Green Lt Green Lt Green VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 15 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the ﬂ...
Page 16 NAV RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE! PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro KFOR01 Dash Kit Radar Installation Guides E L E C T R O N I C S...
Page 17 Ford FusioN with NAV 2010-2012 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
Page 18 (ﬁ g. 1.7) Fig. 1.5 Fig. 1.6 8. Note: In some trims, this module may have to be relocated to make the new radio ﬁ t. (ﬁ g. 1.8) Fig. 1.7 Fig. 1.8 Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 19 C: Aftermarket radio Plug the data cable to the data port of the aftermarket radio. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio (labeled iDatalink. If there is no iDatalink audio input, connect to AUX).
Page 20 FACTORY RADIO HARNESS DATA AUDIO VEHICLE CABLE CABLE STEP 6 STEP 3 STEP 3 OBDII CONNECTOR STEP 5 STEP 5 PINK/RED (NC) MAESTRO RR MODULE FO1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 21 Illumination Orange Orange/White Orange/White Orange Reverse Light Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake Lt Green Yellow/Blue Lt Green Lt Green Lt Green VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 22 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the ﬂ...
Page 23 NAV RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE! PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro KFOR01 Dash Kit Radar Installation Guides E L E C T R O N I C S...
Page 24 Ford MustANg with NAV 2010-2014 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
Page 25 4. Using (4) 7mm screws, reinstall the radio chassis brackets Fig.1 Fig. 2 and set the screen brackets aside to be used later. (ﬁ g. 1.5) Fig. 1.3 Fig. 1.4 Fig. 1.5 Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 26 C: Aftermarket radio Plug the data cable to the data port of the aftermarket radio. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio (labeled iDatalink. If there is no iDatalink audio input, connect to AUX).
Page 27 FACTORY RADIO HARNESS DATA AUDIO VEHICLE CABLE CABLE STEP 6 STEP 3 STEP 3 OBDII CONNECTOR STEP 5 STEP 5 PINK/RED (NC) MAESTRO RR MODULE FO1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 28 Illumination Orange Orange/White Orange/White Orange Reverse Light Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake Lt Green Yellow/Blue Lt Green Lt Green Lt Green VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 29 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the ﬂ...
Page 30 NAV ANd shAker RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE! PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro KFOR01 Dash Kit Radar Installation Guides E L E C T R O N I C S...
Page 31 Ford MustANg with NAV ANd shAker 2010-2014 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
Page 32 4. Using (4) 7mm screws, reinstall the radio chassis brackets Fig.1 Fig. 2 and set the screen brackets aside to be used later. (ﬁ g. 1.5) Fig. 1.3 Fig. 1.4 Fig. 1.5 Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 33 C: Aftermarket radio Plug the data cable to the data port of the aftermarket radio. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio (labeled iDatalink. If there is no iDatalink audio input, connect to AUX).
Page 34 FACTORY RADIO HARNESS DATA AUDIO VEHICLE CABLE CABLE STEP 6 STEP 3 STEP 3 OBDII CONNECTOR STEP 5 STEP 5 PINK/RED (NC) MAESTRO RR MODULE FO1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 35 Illumination Orange Orange/White Orange/White Orange Reverse Light Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake Lt Green Yellow/Blue Lt Green Lt Green Lt Green VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 36 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the ﬂ...
Page 37 NAV ANd shAker Pro RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE! PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro KFOR01 Dash Kit Radar Installation Guides E L E C T R O N I C S...
Page 38 Ford MustANg with NAV ANd shAker Pro 2010-2014 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
Page 39 4. Using (4) 7mm screws, reinstall the radio chassis brackets Fig.1 Fig. 2 and set the screen brackets aside to be used later. (ﬁ g. 1.5) Fig. 1.3 Fig. 1.4 Fig. 1.5 Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 40 C: Aftermarket radio Plug the data cable to the data port of the aftermarket radio. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio (labeled iDatalink. If there is no iDatalink audio input, connect to AUX).
Page 41 FACTORY RADIO HARNESS DATA AUDIO VEHICLE CABLE CABLE STEP 6 STEP 3 STEP 3 OBDII CONNECTOR STEP 5 STEP 5 PINK/RED (NC) MAESTRO RR MODULE FO1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 42 Illumination Orange Orange/White Orange/White Orange Reverse Light Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake Lt Green Yellow/Blue Lt Green Lt Green Lt Green VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink Automotive Data Solutions Inc. © 2020 ADS-RR(SR)-KFOR01-DS-IG-EN maestro.idatalink.com...
Page 43 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the ﬂ...

This manual is also suitable for:

Maestro rr2