SAFETY TIPS Do not insert fingers or foreign matter into the air-inlet and outlet. Do not use in an environment filled with hydrogen, natural gas, propane and other flammable gases. Do not use the air purifier if the power cord or plug is damaged or the wall’s power socket has become loose.
Product Diagram MACHINE STRUCTURE 1. Front Panel 2. Pre-Filter 3. Composite Filter 4. Panel Switch 5. Main Body 6. Laser Sensor 7. Control Panel...
Page 7
CONTROL PANEL INSTRUCTIONS PM Index, Timer, and Display Area Power: Turns purifier on and o . Max: Sets the purifier to the maximum air purification speed (greater than high mode) for 60 minutes before returning to previous speed. Speed: Choose from 4 di erent fan speeds (sleep, low, medium, and high). Timer: Sets purifier on a timed mode (1 - 12 hours).
Page 8
AIR QUALITY FRONT PANEL DISPLAY A precision laser sensor detects your air quality in real-time, reporting the true concentration of particulate matter (PM) in your air. Consistent with the Air Quality Index set by the EPA, a display on the top of the unit shows your live PM index reading, while a light strip on the front panel changes colors according to your EPA index score, so you can...
Operation BEFORE OPERATION Before using for the first time, unpack the filters, remove the polybag, and reinstall them. While using the air purifier, please place it at least 6 feet away from devices that emit radio waves (such as TVs, radios or clocks), to prevent radio interference. Do not install the sensor directly facing any air-outlet, or it may a ect normal operation of the device.
Page 10
HOW TO REMOVE FILTERS 1. Removing the Front Panel: Hold both sides of the front panel and pull towards you until the panel disconnects from the magnet. Do not pull too hard, to avoid damage. 2. Removing the Pre-Filter: Grab the center holders and lightly pull. The Pre-Filter will pop out.
Page 11
OPERATION Plug your purifier into the 120V outlet. Press Power button to turn the machine ON/OFF. Press MAX to set the purifier to the maximum speed. It will run on Max for 60 minutes before returning to the original running mode. SPEED control Press SPEED to manually adjust the fan speeds from 1-4 (sleep, low,...
No need to replace Composite Filter Every 3,000 hours or sooner Purchasing Additional Air Filters Note: To avoid shortening the life of your air purifier, use only certified Hathaspace filters for HSP002. Guidelines: • Replace filters every 4 months for optimal performance.
Filter replacement reminder hit 3000 hours. AUTO + TIMER buttons Press and hold AUTO + TIMER to reset. flashing Replace filters. Specifications Product HSP002 120 V / Please refer to the nameplate on the back of Rated Voltage the machine. Rated Frequency 60HZ Rated Power...
Customer Support Hathaspace strives to make every part of your experience exceptional. If you have any questions or concerns about your air purifier, please feel free to contact our Customer Support. Email: team@hathaspace.com Website: https://hathaspace.com Note: To avoid shortening the life of your air purifier, use only certified Hathaspace filters for HSP002.
Need help?
Do you have a question about the HSP002 and is the answer not in the manual?
Questions and answers