Sendl: Send Level Adjustment (L Ch.); Sendr: Send Level Adjustment (R Ch.); Display; Effect Assign - Korg ToneWorks PXR4 Owner's Manual

P.3-1 SendL: Send level adjustment (L ch.)
Adjusts the level sent from each track to the left channel of
the effect.
Setting this will have no effect if the effect insert location is
not set to "MASTER."
1. Send-L# .......................................................... [000...100]
(#= 1, 2, 3, 4) *Refer to P.1-1 Level
P.4-1 SendR: Send level adjustment (R ch.)
Adjusts the level sent from each track to the right channel
of the effect.
Setting this will have no effect if the effect insert location is
not set to "MASTER."
1. Send-R#.......................................................... [000...100]
(#= 1, 2, 3, 4) *Refer to P.1-1 Level

DISPLAY

+
Here you can select the information that will be displayed
in the level meter. Hold down the [SHIFT] key and press
the [MIXER] (DISPLAY) key to switch the setting.
PRE:
The pre-fader level (the level before passing through the
level fader) of each channel will be displayed. Select this
setting when you want to know whether the input level is
appropriate, or whether the track is outputting sound. In
this case, "L/R" will display the post-fader level.
POST:
The post-fader level (the level after passing through the
level fader) of each track will be displayed. Select this set-
ting when you want to know whether the playback level
is appropriate, or whether the recording level is appropri-
ate.
MIXER:
Select this setting when you want to compare the mixer
parameter values for each track. The parameter (LEVEL,
PAN, SENDL, SENDR) selected in Mixer mode will be
displayed.

EFFECT ASSIGN

+
Here you can select the effect insert location, and select
the effect type. The PXR4 has one built-in effect unit, and
you can select one of the following locations into which it
will be inserted.
Hold down the [SHIFT] key and press the [EFFECT] key
to switch this setting.
GUITAR: Mono-in mono-out
The effect will be inserted immediately after the input.
Select this when you want to record while applying a
mono effect.
If you select "GUITAR," only one track can be selected for
recording.
INSERT: Stereo-in stereo-out
The effect will be inserted immediately after the input.
Parameters
67