Korg ToneWorks PXR4 Owner's Manual page 47

Use the dial to select the number of times to copy the
data. For this example, select "3" as the number of
times. Then press the [CURSOR] right key.
Select "EditMode" (editing unit).
7
For this example, select "Fast."
If the editing location turns out to be inaccurate, undo the
operation, and then select "Best" and try the operation again.
If you select "Best," some time may be required for process-
ing.
Select the "InTime."
8
Turn the dial to select the mark number that you regis-
tered at the In time location. Then press the [CURSOR]
right key.
By pressing the [CURSOR] down key, you can edit the time
location of the selected mark. You can also press the [PLAY]
key to play back the sound for approximately two seconds
from the selected time location.
Select the "OutTime."
9
Turn the dial to select the mark number that you regis-
tered at the Out time location. Then press the [CUR-
SOR] right key.
By pressing the [CURSOR] down key, you can edit the time
location of the selected mark. You can also press the [PLAY]
key to play back the sound for approximately two seconds
from the selected time location.
Select the "ToTime."
0
Turn the dial to select the mark number that you regis-
tered at the To time location. Then press the [CUR-
SOR] right key.
By pressing the [CURSOR] down key, you can edit the time
location of the selected mark. You can also press the [PLAY]
key to play back the sound for approximately two seconds
from the selected time location.
Execute the Copy operation.
A
When the display asks "CopyOK?," press the [CUR-
Operation
45