Synchronizing The Playback With Other Electribe Models - Korg Electribe EM-1 Owner's Manual

3. Basic operation (Quick Start)

Synchronizing the playback with other ELECTRIBE models

For an even broader range of possibilities, the playback of the EM-1
nized with other models of the series: the ELECTRIBE•S
1 ). Here's how you can make the ES-1
the EM-1 .
Use a MIDI cable to connect the MIDI OUT connector of the EM-1
connector of the ES-1
jacks of the ES-1
system (amplified speakers).
1.Press the Global mode key to move to Global
mode.
2.Use the cursor [ ][ ] keys to select Clock (the
corresponding LED will light).
3.Set the EM-1
fer to p.46 "Synchronizing the EM-1 with exter-
nal MIDI devices (MIDI Clock).")
4.Press the Play/Pause key of the EM-1
pattern or song. (The Play/Pause key will light.)
The ES-1
with the tempo of the EM-1 .
If you want the EM-1
cally-numbered pattern in synchronization, make
the following settings.
• Synchronizing the ES-1
the EM-1
• Set the EM-1
(for example, set both to "01").
• On the EM-1
"P" to "O" (refer to p.47 "MIDI filter settings").
• On the ES-1
to C-1. . . A -1
1 from being sounded unintentionally when note-
on messages are received.
It is also easy to make the EM-1
chronization by connecting it to a sequencer or syn-
thesizer that can transmit and receive MIDI Clock
messages.
24
. Connect the part output jacks of the EM-1
to your mixer or powered monitor
to "int," and the ES-1
will play the pattern in synchronization
and ES-1 to play the identi-
to the EM-1
to "int," and the ES-1 to "E t.")
and ES-1 to the same MIDI channel
and ES-1 , set the MIDI filter setting
, set the MIDI note number s e t t i n g
or A#8. . . G 9 . (This will prevent the ES-
playback in syn-
(ES-1
playback in synchronization with the tempo of
EM-1
to "E t." (Re-
to start a
ES-1
as master.(Set
EM-1
can be synchro-
), R (ER-1 ), and A (EA-
to the MIDI IN
and the line output
ES-1