Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098, and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Consumers should note that not all high definition television
sets are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of 525 progressive scan
picture problems, it is recommended that the user switch the
connection to the "STANDARD DEFINITION" output. If there
are questions regarding our TV set compatibility with this model
525p DVD player, please contact our customer service center.
Manufactured under license
Laboratories. "DOLBY" and the double-D symbol are trademarks of
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380,
5,978,762 and other worldwide patents issues and pending. "DTS"
and "DTS Digital Surround" are registered trademarks of Digital
Theater Systems, Inc. © 1996, 2000 Digital Theater Systems, Inc. All
As an ENERGY STAR ® Partner,
Kenwood Corporation has deter-
mined that this products meets the
ENERGY STAR ® guidelines for en-
ergy efficiency. This product can save energy. Saving
energy reduces air pollution and lowers utility bills.
(For the U.S.A.)
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
In compliance with Federal Regulations, the following are
reproductions of labels on, or inside the product relating
to laser product safety.
KENWOOD CORP. CERTIFIES THIS
EQUIPMENT CONFORMS TO DHHS
REGULATIONS NO. 21 CFR
1040.10, CHAPTER 1, SUBCHAPTER J.
Location: Back Panel
Chapter 7: Other Information
(For the U.S.A.)
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may cause harmful interference unless the
modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment may cause harmful interference to radio
communications, if it is not installed and used in
accordance with the instructions. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment
– – Connect the equipment into an outlet on a
circuit different from that to which the receiver is
– – Consult the dealer or an experienced radio / TV
technician for help.