Advertisement
Quick Links
ENGLISH
WIDE LCD PANEL TV INSTRUCTIONS
LT-32A1
© 2010 Victor Company of Japan, Limited
GGT0361-001A-H
0710GLT-NF-MT
Safety Precautions
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
•
Follow this manual regarding setup!
•
Never insert the power cord by wet hand!
-
Connect only to a 110-240 V, 50/60Hz AC outlet.
-
It may cause a fatal electric shock.
•
Make enough room for inserting and removing the power
•
Keep the TV set away from direct sunlight!
plug!
-
TV set can be damaged.
•
Place the TV set in a neat and dry place. Do not place the
•
Place the TV as close to the outlet as possible!
product close to source of steam, heat, moisture or oil.
-
The main power supply for this TV is controlled by inserting or removing
the power plug.
Because it may cause a fire hazard or electric shock hazard!
•
Never cut or damage the power cord!
•
Don’t touch an external metal part of the TV set!
-
If the AC plug is not the right shape, or the power cord is not long
-
It may cause an electrocuted.
enough, use an appropriate plug adapter or extension cable. (Consult
•
For keep a distance from potential ignition
10
10
your retailer)
sources to the components or part in side TV
•
Unplug the power cord when going out!
set, customer should install TV set with a stand
-
The power buttons on the remote control and the TV unit cannot
within ± 10 perpendicularly degree.
completely turn off the TV. (Make appropriate arrangements for
•
Never dismantle the rear panel!
bedridden people.)
-
It may cause an electric shock.
•
Do not allow the TV to fall!
•
Never obstruct the ventilation holes!
-
Do not rest your elbows on, or allow children to hang from the TV.
-
It may cause overheating or a fire.
Plane
-
There is a risk that the TV will fall and cause injuries.
•
Handle LCD panel with care!
-
Make use of the hole on the back of the stand to prevent
-
Use a soft, dry cloth when cleaning.
the TV from falling easily.
•
Never try repair the TV yourself!
•
If the TV is damaged or behaving strangely, stop
-
If the problem cannot be solved in “Troubleshooting” unplug the power
using it at once!
cord and contact your retailer.
-
Unplug the power cord and contact your retailer.
•
If a television is not positioned in a sufficiently stable
•
Never place anything on the TV!
location, it can be potentially hazardous due to falling. Many
-
Placing liquid, naked flames, cloths, paper, etc. on the TV may cause a
injuries, particularly to children, can be avoided by taking
fire.
simple precautions such as:
•
Never expose to rain or moisture!
-
Using cabinets or stands recommended by the manufacturer of the
-
To prevent fire or electric shock, never allow
liquids to enter the unit.
television.
-
Only using furniture that can safely support the television.
•
Never insert objects into the cabinet
-
Ensuring the television is not overhanging the edge of the supporting
openings!
furniture.
-
It may cause a fatal electric shock.
-
Not placing the television on tall furniture (for example, cupboards or
-
Take care when children are near.
bookcases) without anchoring both the furniture and the television to a
•
Hold the TV so as not to scratch the
suitable support.
screen!
-
Not standing the television on cloth or other materials placed between
-
Do not touch the screen when carrying the TV.
the television and supporting furniture.
•
Do not carry the TV on your own!
-
Educating children about the dangers of climbing on furniture to reach
-
In order to prevent accidents, ensure that the TV
the television or its controls.
is carried by two or more people.
•
To prevent accidents, firmly attach the TV stands to the TV
shelf before using microphone.
•
For more details on installation, usage and safety
➔ Consult
•
Make sure that the subwoofer is in good condition before
your retailer.
installing it on the TV.
-
If the subwoofer has leakage current, it may damage the TV or cause
electric shock.
Care when setting
Power requirements
•
If the microphone is installed,
•
To prevent the TV from falling thread the
■
200 mm
•
Connect the power cord
should be lock it’s cable follow
belt through the hole on the back of the
only to a 110-240V, 50/60Hz
picture.
stand and secure it to the TV rack.
AC outlet.
Hole for belt
Installation requirements
■
•
To avoid overheating,
ensure the unit has ample
150 mm
50 mm
150 mm
50 mm
Belt
room.
(not provided)
Screw (not provided)
* Please see how to set up the TV and connection in GGT0356-001A-H.
1
Using the TV’s Menu ---> Area - 2
Picture Mode
Select the picture as you like. (Standard / Soft / Bright)
On Timer
Turns on the TV from standby mode.
CH
Select a channel. (Air : CH02 - CH69 ,
Backlight
Darker <--> Brighter
Cable : CC01 - CC125)
Picture
Lower <--> Higher
On Timer Set a time. (00:00 - 12:00)
Brightness
Darker <--> Brighter
Sleep Timer
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Detail
Softer <--> Sharper
Channel Guard Stop children from watching specific channels.
Color
Lighter <--> Deeper
Blue Back
Display a blue screen and mute the sound when the
Tint
Reddish <--> Greenish *Only NTSC
signal is weak or absent. (Off / On)
White Balance
Select the white balance of the picture. (Cool / Mid / Warm)
Child Lock
Disables the side control buttons of the TV. (Off / On)
Features
Finer picture adjustment
Auto Shutoff
Set the power to turn off if no TV signal (RF) is
Clear SD
For clearly picture (Off / Mode-1 / Mode-2)
received and no operation is performed for about 15
Digital VNR
Reduces the amount of noise in original
minutes. (Off / On)
picture. (Off / On)
Favorite Setting Delete the favorite channel that you registered by
(Blue)
.
Color Management
For natural - looking pictures. (Off / On)
Power Lamp
Sets power lamp lighting while the TV is on. (Off / On)
Picture Management
Fix bright / dark pictures. (Off / On)
Eco Mode
Adjust picture contrast to match your room brightness.
Dynamic Backlight
Reduces the brightness of the backlight
(Off / Eco-1 / Eco-2 / Max-Eco)
when the screen is dark. (Off / On)
Color System
Select an appropriate color system.
Auto Program Automatically registers channels.
(Auto / NTSC 3.58 / PAL-M / PAL-N)
Channel
Skip
(Red)
Skip the channel by
.
Zoom
Change the aspect ratio.
Summary
(Auto / Regular / Panoramic /14:9 Zoom /
Cancel
(Green)
Cancel the skip channel by
.
16:9 Zoom / 16:9 Zoom Subtitle / Full)
(Yellow)
ID
Edit a channel name by
.
MTS
Select the stereo and SAP broadcasted programs.
•
Channels are to be skipped cannot be selected by
(Stereo / SAP / Mono)
the CHANNEL - / + button.
Sound Meister
Set sound theme to match your listening source.
•
The skip can be set to all channels of Air (CH02 -
(Off / Dynamic / Pure / Living)
CH69) and Cable (CC01 - CC125).
Bass
Compensates low frequencies to widen the
Language
Select your desired on screen display language.
frequency band. (Weaker <--> Stronger)
Video-2 Setting Switch between video and component signal.
Treble
Compensates high frequencies to widen the
(Video / Component)
frequency band. (Weaker <--> Stronger)
Rocket Start
TV can turn on quickly. (Off / On)
Surround
Expands the stereo sound naturally.
•
When Rocket Start is On, power consumption at
(Narrower <--> Wider)
standby mode will more than normal standby mode.
Balance
Left Stronger <--> Right Stronger
Closed Caption Select the desired caption or text channel.
Voice Enhancer Uses sound enhancement technology. (Off / On)
Closed
Select to view close caption or text
Al Volume
Prevent sudden increase or decrease of sound. (Off / On)
Caption
information. (Off / CC / Text)
Subwoofer Out
Chooses to connect subwoofer. (Off / On)
Caption
Select the desired caption.
Subwoofer Level Adjusts sound level of your subwoofer.
(CC1 / CC2 / CC3 / CC4)
(Lower <--> Louder)
Text
Select the desired text channel.
•
When Subwoofer Out set to On, you can adjust
(T1 / T2 / T3 / T4)
Subwoofer Level.
•
Closed Caption is not available for component
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
signal.
Karaoke
Chooses to reduce the vocals.
HDMI Setting Setting for HDMI input. (Size / Audio)
(Off / Mode-1 / Mode-2)
PC Setting
Setting for PC input.
Main Volume
Adjusts volume level. (Lower <--> Louder)
(Auto / PC Position / Phase / Pixel)
Microphone Volume
Adjusts volume level of microphone.
* Please see CH/CC List in GGT0356-001A-H.
(Lower <--> Louder)
Useful functions
Channel Guard :
Karaoke :
Stop children from watching specific channels.
You can enjoy to reduce the vocals for your own karaoke.
1
1
Select “Channel Guard”
Select “Karaoke”
1. Select a number
1. Select
Features
Sound
0
> Set ID No.
2. To the next column
Karaoke
2. Adjust
O K
O K
Karaoke
Off
0
0 0 0
3. Set
3. Finish
Main Volume
Microphone Volume
Chooses to reduce the vocals.
Karaoke
2
Select a channel and lock it (
: locked)
Off
: Normal sound of song
Lock / Release
Mode-1 : Only sound of music
1. Select a
Mode-2 : To sing, accompanying with sound of song
Features
(Blue)
channel
>> Channel Guard
•
Karaoke function works only for stereo sound system.
PR
ID
CH / CC
OK
01
SAT
CH 02
•
If using Karaoke disc, users must choose to remove the
02
– – – – – –
CH 05
03
BBC
CH 47
04
IEEE
CH 09
vocals from the player.
05
APL
CH 11
06
DANY
CH 07
07
Main Volume
Adjusts volume level. (Lower <---> Louder)
08
09
Microphone Volume Adjusts volume level of microphone.
10
•
View a locked channel by use the numerical buttons to enter the channel
(Lower <---> Louder)
number. When
appeare, press “Display” button and enter your “ID No.”
•
Microphone Volume is available when plug in microphone.
Subwoofer out :
•
Microphone to be used with the “
Karaoke” function of JVC must
You can enjoy subwoofer sound from Subwoofer out.
be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type;
1
Select “Subwoofer Out”
otherwise, noise will result.
Freeze :
Take snapshots of the screen.
1. Select
Sound
Stereo / I II
Mono
I II
Cancel
Sound Meister
2. Adjust
OK
O K
1
Balance
Voice Enhancer
3. Finish
Off
Press “
” again,
OK
AI Volume
Off
or change the
Subwoofer Out
On
Freeze
Subwoofer Level
channel.
Karaoke
still picture
Chooses to connect subwoofer. (Off / On)
•
You cannot save or export the snapshot.
•
When Subwoofer Out set to On, you can adjust Subwoofer Level.
•
Freeze function is not available for HDMI, PC and Component signal.
•
Subwoofer to be used must have a built-in amplifier.
4
Remote control buttons and functions
Adjust Volume
1 Power On / Off
# Volume control / Turn off muting
20
[ For button side front will be displayed on-screen menu
VOLUME
VOLUME
2 Colour buttons
12
•
When press and hold the button for 3 seconds,
3 Turn on “Clear SD”
on-screen menu will be displayed.
4 Turn on “Zoom”
Clear SD
•
To exit, press and hold the button again for
1
2
3
5 Turn on “Eco Mode”
15
3 seconds. ]
CHANNEL
CHANNEL
ZOOM
6 Turn on “Karaoke”
4
19
5
6
$ Function for viewing Teletext
7 Favourite channel setting
ECO
5
% To Teletext
9
7
8
8 Display on-screen menu
6
& Change channel / Page / Hyper Scan
+
RETURN
KARAOKE
9 Operate the menu
0
18
( Channel information
7
1
! To previous screen
TV/VIDEO
MENU
) Switch between TV / Video input
17
8
" Turn on “Sound Meister”
~ Return Plus / Return function
+ Change channel / page
Microphone
9
OK
, Turn the volume off / on
10
DISPLAY
BACK
16
Zoom : Change the aspect ratio
V-Scroll
11
CH
VOL
•
When 720p or 1080i or 1080p signal
is received, “Full” and “Slim” can be
1. Select
15
12
selected.
Picture
16:9 Zoom
Zoom
OK
•
In PC mode, “Regular” and “Full” can
MODE
Auto
Panoramic
13
2. Set
Regular
be selected.
Panoramic
14:9 Zoom
Move the picture with 3 or 4
16:9 Zoom
14
16:9 Zoom Subtitle
while this bar is displayed.
Full
RM-C2022
LCD
Hyper Scan :
CH
Press and hold
. PR changes without changing the picture screen.
Once you release the button, the picture of the selected PR will appear.
Return Plus : Return to the frequently viewed channel.
RETURN+
Return Plus Programmed by select the frequently viewed channel then press and hold
.
RETURN+
Return Plus Canceled by press and hold
.
Return : Return to the previously viewed channel.
Favourite channel setting.
1. Register the favourite channel
2. Recall the favourite channel
Press number
Press number
Set 1-4 ?
Favourite 1-4 ?
button (1-4 only)
button (1-4 only)
Press and hold
Press
•
If the favourite channel has not been registed then “ No memory “ will
Programmed! will be displayed.
be displayed.
“AAA/R03”
•
Insert the batteries
WARNING:
Batteries
Use two “AAA/R03” dry cell batteries.
If this symbol is shown,
Batteries shall not be exposed
Insert the batteries from the · end,
it is only valid in the
to excessive heat such as direct
making sure the · and ª polarities
European Union.
sunshine, fire or the like.
are correct.
WARNING:
To prevent the spread of fire, keep candles or other open flames away from
this product at all times.
Initial Settings
1
2
3
Turn on the TV.
Select a language.
Select Country Area.
ME N U
Set Up
1. Select
Set Up
1. Select
> Language
> Country Area
ไทย
English
Area - 1
JVC logo appears
Tiếng Việt
Area - 2
OK
OK
Português
Français
Melayu
2. Set
2. Set
Українська
Pусский
•
Show only when powering on for the first time.
Castellano
•
The power on the unit can also be used.
• The select the new Country Area after Initial Setting has completed.
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
(While the cursor is pointing to Picture menu
1
and hold for 3 seconds.)
2
Useful functions (continued)
Eco Mode :
Adjusts picture contrast according to the brightness of your room to reduce power consumption.
Off
: Deactivates the function
Eco-1
: Picture is darkened for the 1st level.
Eco-2
: Picture is darkened for the 2nd level (more than the 1st level).
Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house
works at the same time).
- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.
- When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.
- After unplugging the TV or press “Power off” button, this function will be reset back to “Off”
Viewing Teletext
Watching Video or DVDs
1
You can watch the Teletext broadcast channel with Text Functions.
Select the input source.
1. Select
AV Select
1
TV mode <--> TEXT mode
0 01
1 Video-1
2 Video-2
OK
3 HDMI
2
2. Set
Select a Teletext page by press number button (0-9).
4 PC
•
Move up or down a page by CHANNEL +/-.
•
Operate the connected device and play video.
List Mode
: Book mark your favourite page.
MODE
(Red)
(Green) (Yellow) (Blue)
2
Select “Set Up” Menu.
for select to save
Press number button
HDMI setting
: Setting for HDMI input.
for enter the number
save
Size
: Auto / 1 / 2
of page.
If wrong screen size appears in 480p (525p),
• Recall your favourite page by press the colour button.
change to “1” or “2”.
Hold
: Hold the current page.
Audio
: Auto / Digital / Analogue
• Cancel by press this button again.
If no sound, change to “ Analogue “ or “ Digital”.
Reveal
: Display hidden information.
PC Setting
: Setting for PC input.
• example : answer to a quiz, etc
Auto
: Automatic adjust by 2.
Size
: Double the size of the displayed text.
PC Position
: Adjust screen position by 3 / 4.
Index
: Returns to page “100” or a previously designated page.
And set by
.
OK
Cancel
: Leave the current page open, while you switch to watch TV.
Phase
: Sets the focus of screen.
• Useful when running a page search.
Pixel
: Adjusts the horizontal feature of screen.
Sub-page
: Display the number of Sub-page.
• Cancel by press this button again.
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Poor picture quality
Severe noise or snow
Unnatural colour >>
Adjust “Colour” and “Backlight”.
Check the aerial cable and TV connections .
Check “Colour System”. If “Auto” is selected.
Check the direction of the aerial.
Select the specific colour system manually.
Check the aerial or its cable damaged or not.
Poor sound
Patterns, stripes or noise
Adjust the “Bass” and “Treble”.
Interference caused by devices such as an amplifier, personal computer,
II” switch to “Mono”.
If receiving a poor signal in “Stereo/I
or a hair drier, Move it away from TV.
■
Adjust the channel reception using “Manual”.
Ghosting (Doubling of images)
For HDMI signal, wrong screen size.
Interference occurs caused by signal reflection from mountains or building.
Switch “Size” in “HDMI Setting” to “1” or “2”.
Try to adjust the aerial’s direction or use another antenna.
For HDMI signal, green and distorted screen
Cannot turn it on
Wait a little for the signal to stabilize when switching the signal format for
Ensure the power cord is connected to the AC outlet correctly.
an “HDMI” device.
Cannot operate the remote control.
For HDMI signal, No picture / No sound
The batteries may be exhausted. Replace with new batteries.
Use the cable marked with HDMI logo.
Ensure that you are operation the remote control at less than 7 meters
Check if the device is compliant with HDMI.
from the front of your TV.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or
Remote control stops working
“Analogue” or “Auto” for DVI devices.
Unplug TV, several minutes later plug it in again.
Some functions do not work.
Side control buttons do not work
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Switch “Child Lock” to “Off”.
Black or white dots appear on the screen.
Aspect ratio changed unintentionally
LCD panels use fine dots (“pixels”) to display images. While more than
Press “
” button to return to your settings.
ZOOM
99.99% of these pixels function properly, a very small number of pixels
PC screen alignment is off
may not light, or may light all the time. It is not a malfunction.
Adjust the “PC Position” in “PC Setting” of Set Up menu.
No picture, No sound
Blue screen appears on the screen
Some input do not output from OUTPUT terminal.
Switch “Blue Back” to “Off”.
Subwoofer, No sound
Strange picture when using an external device
May be signal source is not low frequency bass signal.
If the top of the image is distorted, check the video signal quality itself.
Check subwoofer cable connected correctly.
If movement appears unnatural when receiving a signal from a DVD
Feedback sound symptoms
player, etc. with 625p (progressive-scanning), change the output setting of
Keep the microphone away from the TV’s speakers.
the external device to 625i (interlace-scanning).
Echo
Lower the sound level in “Microphone Volume” in order to prevent the echo.
5
Initial Settings (continued)
If you select Country Area to “Area-1”
If you select Country Area to “Area-2”
4
4
Select the teletext language group.
Select Air or Cable.
1. Select
1. Select
Set Up
Set Up
> Teletext Language
> Auto Program
OK
OK
Group-1
Air
Group-2
Cable
2. Set
Group-3
Group-4
Group-5
5
5
Automatically register channels (Auto Program).
Searching for the channels (Auto Program)
Set Up
Set Up
OK
> Auto Program
>> Auto Program
CH 40
CH 40
5%
5%
6
6
Check what was registered.
Check what was registered.
OK
OK
Set Up
Set Up
> Edit
> Channel Summary
PR
ID
CH / CC
CH / CC
ID
Skip
01
– – – – – –
CH 02
CH 02
– – – – – –
02
– – – – – –
CH 03
CH 03
– – – – – –
•
If you want to set undesired channels
•
If you want to edit channel, follow Edit
03
B B C A B C
CH 47
CH 04
B B C A B C
04
A B C D E F
CH 76
CH 05
A B C D E F
to be skipped, follow Channel Summary
05
– – – – – –
CH 12
CH 06
– – – – – –
function in Set Up menu.
06
– – – – – –
CH 09
CH 07
– – – – – –
07
– – – – – –
CH 05
CH 08
– – – – – –
Yes
function in Set Up menu.
08
– – – – – –
CH 02
CH 09
– – – – – –
Yes
09
– – – – – –
CH 15
CH 10
– – – – – –
10
– – – – – –
CH 28
CH 11
– – – – – –
Using the TV’s Menu ---> Area - 1
2 / 3 Select Main menu.
Display MENU.
(Picture / Sound / Features / Set Up)
5 / ∞ Select sub menu.
Picture
Picture Mode
Soft
2 / 3 Change setting.
Backlight
Contrast
When 3 is shown.
Brightness
Sharpness
3 Display function setting.
Colour
5 / ∞ Select function.
Tint
White Balance
Warm
2 / 3 Change setting.
Features
or
Exit from Menu.
Confirm after setting.
OK
•
Please see “Menu operation guide” at the bottom of menu on-screen.
Picture Mode
Select the picture as you like. (Standard / Soft / Bright)
On Timer
Turns on the TV from standby mode.
Backlight
Darker <--> Brighter
PR
Select a channel. (01 - 99)
Contrast
Lower <--> Higher
On Timer Set a time. (00:00 - 12:00)
Brightness
Darker <--> Brighter
Sleep Timer
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Sharpness
Softer <--> Sharper
Channel Guard Stop children from watching specific channels.
Colour
Lighter <--> Deeper
Blue Back
Display a blue screen and mute the sound when the
Tint
Reddish <--> Greenish *Only NTSC
signal is weak or absent. (Off / On)
White Balance
Select the white balance of the picture. (Cool / Mid / Warm)
Child Lock
Disables the side control buttons of the TV. (Off / On)
Features
Finer picture adjustment
Auto Shutoff
Set the power to turn off if no TV signal (RF) is
Clear SD
For clearly picture (Off / Mode-1 / Mode-2)
received and no operation is performed for about 15
Digital VNR
Reduces the amount of noise in original
minutes. (Off / On)
picture. (Off / On)
Favourite Setting Delete the favourite channel that you registered by
(Blue)
.
Colour Management
For natural - looking pictures. (Off / On)
Picture Management
Fix bright / dark pictures. (Off / On)
Power Lamp
Sets power lamp lighting while the TV is on. (Off / On)
Dynamic Backlight
Reduces the brightness of the backlight
Eco Mode
Adjust picture contrast to match your room brightness.
when the screen is dark. (Off / On)
(Off / Eco-1 / Eco-2 / Max-Eco)
Colour System
Select an appropriate colour system.
(Auto / PAL / SECAM / NTSC 3.58 / NTSC
Auto Program Automatically registers channels.
4.43 / PAL-M / PAL-N)
Edit / Manual
Move
Move a channel position by 2 and Adjust
Zoom
Change the aspect ratio.
by 3 / 4.
(Auto / Regular / Panoramic /14:9 Zoom /
ID
(Red)
Edit a channel name by
.
16:9 Zoom / 16:9 Zoom Subtitle / Full)
Stereo / I
II
Insert
(Green)
Select the stereo, mono or bilingual language.
Insert a channel by
.
■
(I / II / O / m / Mono)
Select a CH/CC by 3 / 4.
Sound Meister
Set sound theme to match your listening source.
Enter number by 0-9 buttons.
(Off / Dynamic / Pure / Living)
Delete
(Yellow)
Delete a channel by
.
Bass
Compensates low frequencies to widen the
Manual
(Blue)
frequency band. (Weaker <--> Stronger)
Register a new channel by
.
Treble
Compensates high frequencies to widen the
(Red)
(Green)
Beginning channel search by
and
.
frequency band. (Weaker <--> Stronger)
(Yellow)
(Blue)
Surround
Expands the stereo sound naturally.
Channel fine tunning by
and
.
(Narrower <--> Wider)
If the picture or sound is unnatural by
Balance
Left Stronger <--> Right Stronger
for select a system.
Voice Enhancer Uses sound enhancement technology. (Off / On)
Language
Select your desired on screen display language.
Al Volume
Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out
Chooses to connect subwoofer. (Off / On)
Video-2 Setting Switch between video and component signal.
Subwoofer Level Adjusts sound level of your subwoofer.
(Video / Component)
(Lower <--> Louder)
Rocket Start
TV can turn on quickly. (Off / On)
•
When Subwoofer Out set to On, you can adjust
•
When Rocket Start is On, power consumption at
Subwoofer Level.
standby mode will more than normal standby mode.
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
Teletext
Select Teletext language group.
Karaoke
Chooses to reduce the vocals.
Language
(Group-1 / Group-2 / Group-3 / Group-4 / Group-5)
(Off / Mode-1 / Mode-2)
HDMI Setting Setting for HDMI input. (Size / Audio)
Main Volume
Adjusts volume level. (Lower <--> Louder)
Microphone Volume
Adjusts volume level of microphone.
PC Setting
Setting for PC input. (Auto / PC Position / Phase / Pixel)
(Lower <--> Louder)
(continued)
3
Technical information
Sound and Colour system in your country or region
What is “Clear SD”
LCD picture is unstable due to a large number of signal noise. Such noise
Area
Country or Region
System System
appears extensively especially when an LCD displays SD signals. Clear SD
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
mode resolves disadvantage for better picture quality.
Yemen, Indonesia, Malaysia, Singapore, Thailand,
B/G
India, etc.
PAL
Asia,
China, Vietnam, etc.
D/K
Middle
East
Hong Kong, etc.
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
B/G
SECAM
Philippines, Taiwan, Myanmar, etc.
M
NTSC
Russia, etc.
SECAM
D/K
No use “Clear SD”
Use “Clear SD”
Czech Republic, Poland, etc.
No use "Clear SD"
Use "Clear SD"
Europe
Germany, Holland, Belgium, etc.
B/G
PAL
Connect “DVI” devices
UK, etc.
I
Oceania Australia, New Zealand, etc.
B/G
PAL
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Republic of South Africa, etc.
I
PAL
Connect analogue sound output of the DVI device to L and R terminals in
Africa
Nigeria, etc.
B/G
INPUT VIDEO-2.
Egypt, Morocco, etc.
SECAM
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.
Agentina, Paraguay, Uruguay
N
PAL
South
Brazil
M
Language group for Teletext
America
Chile, Peru, Bolivia, Colombia, Venezuela,
M
NTSC
Ecuador, etc.
Group
Languages
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,
PC Signals that can be displayed
Portuguese, Greek, Swedish, Finnish
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
•
If the signal doesn’t appear, check that the vertical frequency on the PC is
German, French
set to “60Hz”.
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
Resolution
640 x 480 (VGA) / 1024 x 768 (XGA)
Serbian, Croatian, Slovenian, Czech, Slovak, English, German
Vertical frequency
60.0
Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
* Machintosh* computers are not supported.
Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,
(Machintosh is a registered trademark of Apple Computer, Inc.)
Finnish
•
If the characters are unreadable.
➡ Select different Teletext language
group.
Specification
Main unit
Terminals / Connectors
Area-1 B / G / I / D / K / M / N
Terminal name
Terminal type
Signal type (IN)
Broadcasting systems
Area-2 M / N
VIDEO-1
RCA connectors x 3 Composite video, Audio L/R
Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /
RCA connectors x 5 Composite video, Analogue
PAL-M / PAL-N
Colour systems
component 480i (525i) / 576i (625i),
Area-2 NTSC 3.58 / PAL-M / PAL-N
Progressive : 480p (525p) / 576p
VHF low channel (VL) = 46.25 to 140.25 MHz
VIDEO-2
(625p),
Area-1
VHF high channel (VH) = 147.25 to 423.25 MHz
HD : 720p (750p) / 1080i (1125i) /
UHF channel (U) = 431.25 to 863.25 MHz
1080p (1125p)
Channels and
VHF low channel (VL) = 55.25 to 127.25 MHz
Audio L/R
frequencies
Area-2
VHF high channel (VH) = 133.25 to 361.25 MHz
HDMI connector x 1 HDMI 480i (525i) / 480p (525p) /
UHF channel (U) = 367.25 to 801.25 MHz
Input
576i (625i) / 576p (625p) / 720p
Receives cable channels in mid band (X to Z+2, S1 to S10),
terminals
HDMI
(750p) / 1080i (1125i) / 1080p
super band (S11 to S20) and hyper band (S21 to S41)
(1125p)
Sound-multiplex
NICAM (I / B / G / D / K ), A2 (B / G / D / K)
PC INPUT
D-SUB (15 pins) x 1 Analogue PC signal
systems
MTS (Multi-channel Television Sound)
HDMI Analog /
Teletext systems
FLOF (Fastext), WST (World System Teletext)
DVI Analog / PC
RCA connectors x 2 Audio L / R
Power requirements
AC 110 V - 240 V, 50/60Hz
Audio
Audio output
6 W + 6 W
(Rated power output)
mini-jack x 1
Speakers
(4 cm x 16 cm) x 2
Microphone
(3.5 mm in
Microphone input
Power consumption
diameter)
105 W
[standby]
[0.7 W]
•
HDMI Analog / DVI Analog / PC Audio use terminal common with
[“Rocket Start” mode
[16 W]
VIDEO-2.
standby]
•
We may change the design and specifications without notice.
Screen size
•
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
(visible area size
80 cm
trademarks or registered trademarks of HDMI Licensing LLC in the United
measured diagonally)
States and other countries.
Dimensions
791.8 x 571.7 x 203.5
(W x H x D: mm)
[791.8 x 520.5 x 103.9]
[without stand]
Weights
15 kg
[without stand]
[12 kg]
Power cord x 1
Remote control unit : RM-C2022 x 1
Accessories
AAA/R03 dry cell battery x 2
Screw x 8
6
Advertisement
