JVC AV-29LS24, AV-29LX14, AV-29VS24, AV-29VX54, AV-29VX74, AV-29WX14, AV-29WX24, AV-25LS24, AV-25LX14, AV-25VX54, AV-25VX74, AV-21CS Instructions Manual page 7

Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
1
Connecting the aerial cable.
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
Rear of TV
To video To audio
output output
To S-video
output
VCR
To aerial input
The illustration shown is just a sample. It may not be same as your
TV.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
VHF/UHF outdoor aerial
AV-29VS24
COMPONENT
VIDEO-1
(VIDEO-2)
OUTPUT
INPUT
INPUT
S
OVER
V
V Y
/ V
L L / L
/ MONO C
B MONO
C
R R R R
To RF
output
2
Connecting the compatible main plug to the AC outlet.
3
Inserting batteries into the remote control.
Insert two batteries by following the + and -
polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit
new batteries. The supplied batteries are for testing,
not regular use.
4
Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
7