Troubleshooting - JVC Everio 1109MNH-SW-VMUC User Manual

Troubleshooting

Before requesting service, consult the following chart or the "Troubleshooting" section
in the Detailed User Guide.
If the solutions indicated in the chart do not solve the problem, consult your nearest
JVC dealer or JVC service center for instructions. Refer also to the FAQ of new
products on JVC's website. Refer also to the Q&A information of new products on
JVC's website (http://www.jvc.com).
This unit is a microcomputer-controlled device. Electrostatic discharge, external noise
and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In
such a case, reset this unit.
■
Reset this unit when it does not function properly or when "...
Error" appears on the screen.
① Turn off the power. (Close the LCD monitor.)
② Remove the AC adapter and battery pack from this unit, reattach them,
and turn on the power again.
Trouble
Trouble
POWER/CHARGE lamp
starts blinking when the
monitor is closed.
Recording cannot be
performed.
Recording stops by itself.
No date/time display.
Sound or video is
interrupted.
For more information, refer to the Detailed User Guide
26
http://manual.jvc.co.jp/index.html/
●
The battery pack is being charged.
●
Check the / button.
●
Set to the recording mode with the
●
Turn off this unit, wait for a while, and turn it on
again. (This unit stops automatically to protect
the circuit when the temperature rises.)
●
Move this unit away from loud or shaky places.
●
Insert a commercially available microSD card,
and set "REC MEDIA FOR VIDEO" and "REC
MEDIA FOR IMAGE" in the media settings
menu to "SD". (There may be a malfunction
with the HDD.)
●
Recording stops automatically after 12 hours of
continuous recording.
●
Set "ON-SCREEN DISPLAY" in the playback
menu accordingly.
●
Sometimes playback is interrupted at the
connecting section between two scenes. This
is not a malfunction.
Action
button.
Page
P.6
P.10
P.14
-
-
P.13
-
-
-