Philips FastCare GC7700 Series Manual page 9

Problem
The appliance has
switched off.
The appliance
produces a loud
pumping sound.
Water droplets
come out of the
soleplate.
Dirty water and
impurities come
out of the
soleplate.
of the soleplate.
The Calc-Clean
process does not
start.
There are water
the appliance
when I detach the
Possible cause
The safety auto-off function was
activated. This happens
automatically when the steam
pressed for more than 15
minutes.
remaining water may drip out of
the soleplate.
The Calc-Clean process has not
Impurities or chemicals present
in the water have deposited in
You have accidentally started the
Calc-Clean process (see chapter
maintenance').
You have not set the
temperature dial to Calc-Clean
or you have not waited for the
iron to heat up.
You have not pressed the Calc-
Water comes from the water
and stand. This is normal.
Solution
then to 'on' position.
the steam trigger until the pumping
out of the soleplate.
Wipe the soleplate dry with a piece of
Calc-Clean process (see chapter
maintenance').
You have to perform the Calc-Clean
- Cleaning and maintenance').
Perform the Calc-Clean process regularly
and maintenance').
Switch off the appliance. Then switch it
to the desired temperature setting
instead of CÁLC CLEAN. Let the iron
heat up until the 'iron ready' light lights up
steadily.
maintenance'.
maintenance'.
These water droplets are harmless. If you
droplets with a dry cloth.
9