Psoc™ 4 Mcu Code Examples; Power Modes Code Example - Infineon PSoC 4000S Manual

PSoC™ 4 MCU low-power modes and power reduction techniques
Code examples
Figure 12 Device selector window
7.3 PSoC™ 4 MCU code examples
7.3.1

Power modes code example

ModusToolbox™ software: This code example is located on GitHub at mtb-example-psoc4-power-modes;
you can easily compare all sleep and deep sleep modes with active mode.
To change the power mode the device is in, press the on-board button longer than two seconds to put the
device into Deep Sleep. To switch the device into sleep mode, press the button between 200 ms and two
seconds. This allows the device to easily switch power modes so that they can be compared. See
see how to switch modes.
Application Note 24 of 38
Figure 12 to
001-86233 Rev. *I
2021-11-04