Download Print this page

Connecting The Converter Box Display Signal Cables; Fig. 6 Dual Link - IBM 07N2229 User Manual

Converter box for the t221 flat panel monitor
Hide thumbs

Advertisement

digital signal cable. If two digital signal cables are attached, disconnect both.
Disconnect the digital signal cable from the computer. The disconnected digital signal cable is
unnecessary with a converter box. Store the cable away.
Important:
Connecting or disconnecting cables while the monitor or computer is switched on may
damage the computer or graphics card.

2.2. Connecting the Converter Box Display Signal Cables

Dual Link signal cable
Connect the end marked "A" of the converter signal cable (07N2229) to digital signal connector A at
the rear of the monitor.
Converter box

Fig. 6 Dual Link

8
P/N: 55P5776
Converter signal cable

Advertisement

loading

This manual is also suitable for:

07n223013m320055p5728T t22155p572955p5776