Method when using for the first time
1.
Connecting
2.
Installing in Windows
3.
Testing
1
Introduction
This instruction manual is for users of the 'TRUST AMI MOUSE 140T WEB
SCROLL'. This mouse gives you complete control over the screen. Roll the ball and
move both the vertical and horizontal scroll axes. This possibility makes viewing
Internet sites outside of screen range much more convenient. This mouse can also
be used as a trackball making it ideal for notebook users.
2
Safety
Carefully read the following instructions before use:
1.
The TRUST AMI MOUSE 140T WEB SCROLL does not require any special
maintenance. Use a slightly damp, clean cloth to clean the mouse.
2.
Do not use aggressive substances, such as petrol or white spirit, to clean
the device. These may harm the material.
3.
Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
4.
Make sure nothing is placed on the power cable. Do not use this device in
an area where the cable can become worn or damaged as a result of
people walking over it.
5.
Do not repair this device yourself.
6.
Have the device repaired by qualified personnel in the following
circumstances:
a)
The power cable or plug is damaged or worn.
b)
The device has been in contact with rain, water or other liquid.
3
Installation
3.1
Connecting
Note:
Connect the mouse to the PS/2 port on your computer only.
1.
Switch off your computer.
2.
Connect the mouse to the PS/2 port on your computer.
3.
Switch the computer on again.
4.
The mouse works directly as a standard PS/2 mouse.
Move on to chapter 3.2 for software installation.
3.2
Installing the software
Note:
The CD-ROM drive is indicated as "D:\". This is only an example and
can vary from one computer to another.
TRUST AMI MOUSE 140T WEB SCROLL
Chapter
!
(3.1)
(3.2)
(3.2)
U K
1
Need help?
Do you have a question about the AMI MOUSE 140T WEB SCROLL and is the answer not in the manual?
Questions and answers