Table of Contents
Advertisement
S Check that the blade and blade guard are
correctly secured.
S When adjusting the carburetor, make sure
the blade is held against the ground and
that no one is in the immediate vicinity.
S Make sure the blade does not rotate when
idling.
S Make sure the handle and safety features
are in order. Never use a machine that has
parts missing or has been changed in
relation to the specification.
S Only use the machine for the purpose for
which it was intended.
Starting
WARNING:
started with the choke in either the
choke or start throttle positions the
blade will start to rotate immediately.
S Ensure that all of the engine covers and
housings are properly fitted before the unit
is started.
S Never start or attempt to run the unit with
the clutch, clutch drum, clutch cover, or
driveshaft removed.
S Never start the machine indoors. Exhaust
fumes can be dangerous if inhaled.
S Observe your surroundings and make sure
that there is no risk of people or animals
coming into contact with the cutting equip-
ment.
S See the "Starting and Stopping" section for
complete instructions.
Fuel safety
S Always use a fuel container with an anti- -
spill valve.
S Never refuel the machine while the engine
is running.
S Always stop the engine and let it cool for a
few minutes before refueling.
S Make sure there is plenty of ventilation
when refueling or mixing fuel (gasoline and
2- -stroke oil).
S Move the machine at least 10 feet (3 me-
ters) from the refueling point before start-
ing it.
Min. 10 ft.
(3 m)
SAFETY INSTRUCTIONS
When the engine is
S Never start the machine:
S If you have spilled fuel on it. Wipe off
the spillage and allow remaining fuel to
evaporate.
S If you have spilled fuel on yourself or
your clothes, change your clothes. Wash
any part of your body that has come in
contact with fuel. Use soap and water.
S If the machine is leaking fuel. Check reg-
ularly for leaks from the fuel cap and fuel
lines.
S Avoid all skin contact with fuel. Fuel is a
skin irritant and may even cause skin
changes.
WARNING:
dling fuel. Bear in mind the risk of
fire, explosion and inhaling fumes.
Transporting and storage
S Store and transport the machine and fuel
so that there is no risk of any leakage or
fumes coming into contact with sparks or
naked flames, for example, from electrical
machinery, electric motors, electrical re-
lays/switches or boilers.
S When storing and transporting fuel always
use approved containers intended for this
purpose.
S When storing the machine for long periods
the fuel tank must be emptied. Contact
your local gas station to find out where to
dispose of excess fuel.
S The engine must be cool before storage or
transporting.
General working instructions
IMPORTANT!
This section describes the basic safety
precautions for working with the edger.
If you encounter a situation where you are
uncertain how to proceed you should ask an
expert. Contact your servicing dealer.
Avoid all usage which you consider to be
beyond your capability.
Basic safety rules
1. Observe your surroundings:
S To ensure that people, animals or other
things cannot affect your control of the
machine.
S To ensure that people, animals, etc., do
not come into contact with the blade or
loose objects that are thrown out by the
blade.
9
Take care when han-
Hide quick links:
Advertisement
Table of Contents
