Safety Instructions - Conrad Electronic 75 15 09 Operating Instructions Manual

3. Safety instructions

The entire bold text must be worded as follows from now on:
The guarantee/warranty will be void if damage is incurred result-
ing from non-compliance with the operating instructions. We will
not assume liability for any resulting damage. Nor do we assume
liability for damage to property or personal injury, caused by
improper use or failure to observe the safety instructions. The
warranty/guarantee will become void in these cases.
• The system components must not be modified or converted, as not only the CE
approval will become void but also the warranty.
• The system components may not be exposed to extreme temperatures, direct
sunlight, intense vibration or heavy mechanical strain.
• If the devices are used in connection with other devices e.g. a television screen,
the operating instructions and security notices of the connected devices must be
observed absolutely.
• The operation of the surveillance camera system does not replace personal
supervision of children or people who require special assistance, but serves only
as a support to this supervision.
• This camera system uses and generates high frequency energy. If the devices
are not installed and operated in accordance with these instructions, they can
cause signal disturbances. If a wireless camera system leads to interference in
other devices, attempt one or more of the following measures listed below, in
order to restore normal function:
• - Change the position of the camera.
• - Increase the distance between the affected device and the radio camera and/or
the receiver of the radio camera system.
• - Select another transmission channel.
• After rapid changes in temperature, the system components require approx.
15 min. to stabilise in order to adjust to the surrounding temperature, before they
can be used.
• The system components are not toys and should be kept out of the reach of chil-
dren!
20