Transportation, Storage And Disposal; Technical Data - Husqvarna 128PS Operator's Manual

Check
Carburetor
Air filter
Transportation and storage
• For storage and transportation of the product
and fuel, make sure that there are no leaks or
fumes. Sparks or open flames, for example from
electrical devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel and chain oil tanks before
transportation or before long-term storage.
Discard the fuel and chain oil at an applicable
disposal location.
• Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
• Remove the spark plug cap from the spark plug.
• Attach the product safely during transportation.

Technical data

Engine
Cylinder displacement, cu.in / cm
Recommended max. speed, rpm
Idle speed, rpm
Max. engine output, according to ISO 8893, kW / hp @ rpm
Catalytic converter muffler
Maximum output shaft rotation
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US Pint / litre
1780 - 001 - 08.02.2022
Possible cause
The idle speed is not correctly ad-
justed.
The air filter is clogged.

Transportation, storage and disposal

Technical data
3
Procedure
Adjust the idle speed with the idle
speed screw T.
Clean the air filter.
To prepare your product for long-
term storage
1. Stop the product and let it become cool before
you disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
4. Clean the product. Refer to
page 15 for instructions.
5. Do a complete servicing of the product.
128PS
(LT28CSHV)
1.7 / 28
8000
2300-3200
0.7 / 0.94 @ 8500
Yes
7200
Champion RCJ 8Y
0.024 / 0.61
0.85 / 0.4
If the saw chain and
Maintenance on
23