Connecting high-definition equipment by
using component cables
There are two sets of high-definition Component
connectors you can use:
1: Y, Pb, and Pr, and Audio L and R
2: Y, Pb, and Pr, and Audio L and R
Connect component video cables and left-right
audio cables to the Component connectors on the
rear of the TV.
Connect the cables to the DVD player.
Turn on the DVD player and start play.
Connect power to the TV; see "Connecting power
to the TV" on page 22.
Turn on the TV; see "Turning the TV On and Off"
on page 25.
Select the input source to view, as well as the
Aspect, and other options; see "Operating the TV"
on page 33.
HP MediaSmart HDTV User Guide
equipment by using S-Video or Video
Connect a standard-definition DVD player, VCR, game
console, camcorder, or other AV equipment by using
S-Vid or Video (composite video) connectors. These
connectors do not pass high-definition signals.
The S-Vid and Video connectors share the
Audio connectors in the set. Do not connect
video cables to both the S-Vid and Video
connectors in a set.
Connect an S-Video cable, or a composite video
cable, by using the AV Input connector sets on the
rear of the TV:
1: S-Vid or Video, and Audio L and R
2: S-Vid or Video, and Audio L and R