Locating TV Controls and Connectors
The TV contains controls (indicators and buttons) and connectors.
The TV indicators are located on the front of the TV, and the buttons are located on the right side.
A: Power light
Power light shows whether the TV is on or off. The light is blue when the TV is plugged in
but turned off. The light is amber while the TV is powering up after you turn it on, and then it
goes off after about 30 seconds. The light is off when the TV is not plugged in.
Remote control sensor is the location where you point the remote control.
Power turns the TV on or off.
Menu opens (or closes) the onscreen display (OSD).
Select starts the Auto Sync function for a connected PC signal source (PC Input).
[PC Auto Sync]
In an OSD menu, selects the highlighted item.
Source selects the input source: Press Source to open the list of input sources. Press the
Channel buttons to select the input source, and then press Select. Press Source to close the list.
In an OSD menu, functions as the Back button, or moves up one item or menu level.
Channel buttons select the next lower or higher channel.
In an OSD menu, move up or down in the menu.
Volume buttons increase or decrease the sound level.
In an OSD menu, move right or left in the menu, or adjust an item.
Getting to Know Your TV