5
Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
6
Connect the power, and turn on the PC or source
equipment.
7
Adjust the picture, including Auto Sync, by using
the onscreen display Picture/Screen menu; see
“Adjusting the PC Screen image” on page 29.
You can also press the OK button on the TV to
start Auto Sync for the PC image.
Connecting an external sound
system
You can connect an external sound system to the TV
using a digital audio or an analog audio signal:
Use an optical audio cable and the Digital Audio
■
Output connector on the back of the TV to provide
a digital audio signal to an external sound system,
such as a digital receiver or a surround sound
system. To hear analog sound from an analog
source on your digital audio system, you must
connect the Audio Out left and right connectors on
the TV to your sound system.
Use an audio cable and the Audio Out connectors
■
on the back of the TV to provide an analog audio
signal to an external sound system, such as an
analog amplifier or stereo system.
CAUTION: Unplug power for the TV and all
connected components before connecting
an external sound system. Ensure that the
external sound system is powered off.
HP Plasma HDTV User’s Guide