Page 2
Read the instructions in this manual carefully before use! Assembly Plastic clip mounting: 1. Insert the strap through the slot at the bottom of the sprayer. 2. Insert the strap through the clip, flip it upwards, and slip through the clip on the other side. 3.
Page 3
Piston cup replacement 1. Remove the plunger from the container. 2. Unscrew the piston cup screw. 3. Remove the piston cup. 4. Replace the cup. 5. Reinsert the cup, tighten the screw, and place the plunger back into the container. Replacing the glass ball in the cylinder.
Page 4
Διαβάστε προσεκτικά τις οδηγίες του εγχειριδίου πριν την χρήση! Συναρμολόγηση Τοποθέτηση πλαστικού κλιπ: 1. Περάστε τον ιμάντα μέσα από την υποδοχή που βρίσκεται στο κάτω μέρος του ψεκαστήρα. 2. Περάστε τον ιμάντα μέσα από το κλιπ, γυρίστε τον προς τα πάνω και περάστε τον μέσα από το κλιπ από την άλλη πλευρά. 3.
Page 5
Αντικατάσταση κυπέλλου εμβόλου 1. Αφαιρέστε το έμβολο από το δοχείο. 2. Ξεβιδώστε την βίδα του κυπέλλου του εμβόλου. 3. Αφαιρέστε το κύπελλο του εμβόλου. 4. Αντικαταστήστε το κύπελλο. 5. Τοποθετήστε ξανά το κύπελλο, σφίξτε την βίδα και τοποθετήστε το έμβολο πίσω στο δοχείο. Αντικατάσταση...
Need help?
Do you have a question about the NS1600 and is the answer not in the manual?
Questions and answers