2–8
Step-by-Step Basic Installation
Inverter Dimensions for Mounting
Step 4: Locate the applicable drawing on the following pages for your inverter.
4
Dimensions are given in millimeters (inches) format.
External Dimensions
-
L100
-002NFU
-004NFE
-004NFU
NOTE: Some inverter housings require two mounting screws, while others require four.
Be sure to use lock washers or other means to ensure screws do not loosen due to
vibration.
Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com
Technologies Inc.
MODEL
H mm (in.)
107 (4.21)
002NFE
107 (4.21)
107 (4.21)
107 (4.21)
67(2.64)
5(0.20)
4(0.16)
80(3.15)