Guide Button; Info Button - Hitachi P42A202 Operating Manual

How to Use the Remote to Control your TV
(-) DASH /Sleep Button
Use the (-) DASH button with the CHANNEL SELECTOR
buttons to enter Digital Channels that have subchannel
numbers indicated by (-) DASH (example 15-1). For TV mode
only, press to Set the Sleep Timer from 30 minutes to 3 hours
in 30 minutes increments.
LAST CHANNEL button
Press this button to toggle between the current and last
channel viewed.
VOLUME (VOL), MUTE button
Press the VOLUME button (+ or -) until you obtain the desired
sound level.
To reduce the sound to one half of normal volume (SOFT
MUTE) to answer the telephone, etc., press the MUTE button.
Press the MUTE button again to turn the sound off completely
(MUTE). To restore the sound, press the MUTE button one
more time, or VOL UP (+).
Closed Captioning will display automatically when MUTE/
SOFT MUTE is on and Closed Caption is set to AUTO (see
page 40).
When the TV power is turned off at a volume level 31 or greater,
the volume level will default to 30 when the TV is turned on.
However, if it is set to a level 30 or less, the volume level will
be at the level it was set when the TV is turned off.
MENU button
The MENU button will start the On-Screen Display.

GUIDE button

Press this button to access the Channel Guide of your Satellte
receiver, Set Top Box or Cable Box while in SAT/CBL mode.
EXIT button
This button will exit all On-Screen Displays.

INFO button

Press this button when you want to check the channel being
received, the picture source, if the channel has stereo (ST) or
second audio program (SAP), the time, CHANNEL ID and if
the TIMER is set.
ANALOG CHANNELS
Program
Show Name
Information
Program
3:00PM- 3:30PM
Run Time
ST
Audio
Broadcast
Auto
Closed Caption
Setting
DIGITAL CHANNELS
Digital Closed Caption
(only when available)
Program
Information Show Name
Program
3:00PM- 3:30PM
Run Time
Multi DTvCC
Audio Alternate
Broadcast Rating
Program Description
(Press INFO again for a
more detail description)
Auto
Closed Caption
Setting
When an S-VIDEO Input is connected to INPUT 3
Auto
When a Component Video: Y-PbPr Input is connected
Auto
• Press the INFO button again or the EXIT button to
NOTES
return to normal viewing.
• The Aspect setting will not be shown if the channel
is locked.
Press the SELECT button to set the option.
CURSOR buttons/SELECT button
All the On-Screen Display features can be set or adjusted by
using the CURSOR buttons and the SELECT button, except for
numeric entries. Press the CURSOR buttons toward desired
direction and press the SELECT button to select.
Analog Channel
Main Picture Source
& Channel Indication
Air 8
A
Broadcast Channel
KXYZ
Indication
TV-G
480i 3:17PM Clock
Picture Format
Broadcast
Rating
STEREO 10:00 PM
Audio Source Event Timer
Selection
Digital Channel
Air 15-1
D
REGION 5
KPBS-HD
TV-G 1080i 3:17PM
Picture Format
Broadcast
Rating
10:00 PM
Event Timer
S-IN: 3
3:17PM
480i
to INPUT 2
Y-PBPR: 2
480p 3:17PM
Input signal
format
Main Picture Source
& Channel Indication
Broadcast Channel
Indication
Clock
19