Black Level Setting; Virtual Surround; Display Setting - Hitachi DV-PF33U Instruction Manual

H9450UD(EN).qx33 03.1.22 7:19 PM

BLACK LEVEL SETTING

Adjust the Black Level Settings to make the black
parts of the picture as bright as you preferred.
1
Press MODE during playback.
2
Press ENTER to switch ON/OFF.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
3
Press MODE twice or RETURN to exit.

VIRTUAL SURROUND

You can enjoy stereophonic visual space on your exist-
ing stereo system.
1
Press SURROUND during playback.
2
Press SURROUND to set it 1 (Natural effect)
or 2 (Emphasized effect) or OFF.
3
Press MODE or RETURN to exit.
Note (for CD play only)
Virtual Surround will not be effective if the sound
¡
mode is set to something other than STEREO.
Page 31
DVD
ON
DVD CD MP3
OFF
– 31 –

DISPLAY SETTING

You can change certain aspects of the DVD display
screens, on-screen messages and the display panel on
the front of the DVD/VCR.
1
Press SETUP in STOP mode.
2
Press B to select CUSTOM, then press
ENTER.
CUSTOM mode will appear.
¡
3
Press Arrow (s/ B) to select DISPLAY, then
press ENTER to con-
firm.
4
K / L
Press Arrow ( ) to select the below
items, then press ENTER.
TV ASPECT: QUICK
Press Arrow (K/L) for an item selection, then press
¡
ENTER.
Select 4:3 LETTER BOX for a black bars appears on
¡
top and bottom of the screen.
Select 4:3 PAN - SCAN for a full height picture with
¡
both sides trimmed.
Select 16:9 WIDE if a wide-screen TV is connected
¡
to the DVD/VCR.
¡ The default setting is 4:3 LETTER BOX.
ANGLE MARK:
Press ENTER repeatedly to turn Angle mark ON or
¡
OFF.
The default setting is ON.
¡
AUTO POWER OFF:
¡ Press ENTER repeatedly to turn Auto Power off ON
or OFF.
The default setting is ON and it will turn the
¡
DVD/VCR to off automatically after 35 minutes of
no use.
LOGO:
Press ENTER to switch ON (opening
¡
picture)/OFF(black).
The default setting is ON.
¡
5
Press SETUP to exit.
Notes
Be sure to press SETUP, or the setting will not work.
¡
DVD
DISPLAY
TV ASPECT 4:3 L- BOX
ANGLE MARK ON
AUTO POWER OFF ON
LOGO ON
EN
1L25