Download  Print this page

Front-panel Controls; Controller And Amplifier - Harman-Kardon MAS 100 Owner's Manual

High-performance audio system.
Hide thumbs

Advertisement

The MAS 100 and MAS 110 use touch-sensitive controls. To use a control, tap
gently on its lit icon.
Controls are the same for all models.
NOTE:
Power:
Turns the MAS 100/MAS 110 on or places it in Standby mode. To
completely power off the unit, unplug the power supply.
Message Display:
The time and messages are displayed
in this two-line text display.
CD Slot:
Load compatible discs here.
Skip/Scan Forward/Reverse:
rently, depending on the current source:
• iPod, CD or USB:
Press and release the Forward Button to skip
to the next track. Press the Reverse Button twice to skip to the previous
track. Press and hold the Scan Forward/Reverse Buttons to scan forward
or reverse within a track.
• Radio:
Press and release the Preset +/- Button on the Remote Control
or the Skip Forward/Reverse Button on the front panel to select the next/
previous programmed preset station. Press and hold the Skip/Scan
Forward/Reverse Button to scan quickly through the stations. When you
release the button, the tuner continues to scan until it finds a station of
acceptably strong signal quality, and then it stops. To stop the scan before
a station is found, press the Forward/Reverse button again.
Note: Controls are the same for all models.
Power
CD Slot

FRONT-PANEL CONTROLS

CONTROLLER AND AMPLIFIER

These buttons function diffe-
Message Display
Play/Pause:
Each tap toggles between the Play and Pause functions.
Stop:
Fully stops playback.
Eject:
When a CD is loaded, tap here to eject it.
USB Port A:
Connect a compatible USB device here to enjoy playback
of audio MP3 or WMA files. Although most USB flash and hard-disk drives in
the FAT32 file format, as well as many MP3 players, are compatible with the
MAS 100 and MAS 110 systems, due to the wide variety of manufacturers,
playback cannot be guaranteed. Do not connect an iPod or iPhone to this port.
Do not connect a personal computer or any peripherals to this port.
Line-In Jack (Line Input):
to-male cable (not included) to the headphone or line-level
output on a portable player or other device.
Headphone Jack:
Outputs a stereo signal for private
listening through most headphones that are equipped with
a 3.5mm plug.
Volume Control:
Increases or decreases the volume.
Skip/Scan Forward/Reverse
Connect a 3.5mm male-
USB Port
LINE-IN Input
Play/Pause
Headphone
Eject
Stop
Volume
5

Advertisement

Table of Contents

   Also See for Harman-Kardon MAS 100

This manual is also suitable for:

Mas 110

Comments to this Manuals

Symbols: 0
Latest comments: