Grizzly G0554Z Owner's Manual: Section 6: Maintenance; Schedule; Cleaning & Protecting

14" x 40" gear-head floor lathe.
Hide thumbs

Advertisement

SEcTiON 6: MAiNTENANcE

Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Note: This maintenance schedule is based on
average daily usage. Adjust the maintenance
schedule to match your usage to keep your lathe
running smoothly and to protect your investment.
Daily check:
loose mounting bolts.
Worn or damaged wires.
Any other unsafe condition.
Every 8 Hours of Operation:
Clean the machine.
perform the daily lubrication tasks (page
51).
Check/fill headstock, gearbox, and apron oil
reservoirs (page 52).
Check/fill the coolant tank (page 54).
-50-
2 Weeks After installation:
Make sure the bedways are level from side-
to-side and front-to-back (page 15).
After First 40 Hours of Operation:
drain and refill the headstock, gearbox, and
apron oil reservoirs (page 52).
Every 30 Days:
drain, clean out, and refill the coolant tank
(page 54).
Annually:
drain and refill the headstock, gearbox, and
apron oil reservoirs (page 52).
Make sure the bedways are level from side-
to-side and front-to-back (page 15).
cleaning &
protecting
Cleaning the Model g0554z is relatively easy.
Vacuum excess metal chips, then wipe off built-
up grime. protect the unpainted metal surfaces
with regular applications of products such as
Model h8257 primrose Armor plate with Moly-d
Machine and Way oil (refer to AccESSORiES on
page 48).
Model g0554z (Mfg 01/09+)

Advertisement

   Related Manuals for Grizzly G0554Z

Comments to this Manuals

Symbols: 0
Latest comments:
  • teddy martin Feb 06, 2017 03:25:
    where can I get one of these carriage stops at g4003